research title research design brainly

Have a language expert improve your writing

Run a free plagiarism check in 10 minutes, generate accurate citations for free.

• Knowledge Base

Methodology

• What Is a Research Design | Types, Guide & Examples

What Is a Research Design | Types, Guide & Examples

Published on June 7, 2021 by Shona McCombes . Revised on November 20, 2023 by Pritha Bhandari.

A research design is a strategy for answering your   research question  using empirical data. Creating a research design means making decisions about:

• Your overall research objectives and approach
• Whether you’ll rely on primary research or secondary research
• Your sampling methods or criteria for selecting subjects
• Your data collection methods
• The procedures you’ll follow to collect data
• Your data analysis methods

A well-planned research design helps ensure that your methods match your research objectives and that you use the right kind of analysis for your data.

Table of contents

Step 1: consider your aims and approach, step 2: choose a type of research design, step 3: identify your population and sampling method, step 4: choose your data collection methods, step 5: plan your data collection procedures, step 6: decide on your data analysis strategies, other interesting articles, frequently asked questions about research design.

• Introduction

Before you can start designing your research, you should already have a clear idea of the research question you want to investigate.

There are many different ways you could go about answering this question. Your research design choices should be driven by your aims and priorities—start by thinking carefully about what you want to achieve.

The first choice you need to make is whether you’ll take a qualitative or quantitative approach.

Qualitative research designs tend to be more flexible and inductive , allowing you to adjust your approach based on what you find throughout the research process.

Quantitative research designs tend to be more fixed and deductive , with variables and hypotheses clearly defined in advance of data collection.

It’s also possible to use a mixed-methods design that integrates aspects of both approaches. By combining qualitative and quantitative insights, you can gain a more complete picture of the problem you’re studying and strengthen the credibility of your conclusions.

Practical and ethical considerations when designing research

As well as scientific considerations, you need to think practically when designing your research. If your research involves people or animals, you also need to consider research ethics .

• How much time do you have to collect data and write up the research?
• Will you be able to gain access to the data you need (e.g., by travelling to a specific location or contacting specific people)?
• Do you have the necessary research skills (e.g., statistical analysis or interview techniques)?
• Will you need ethical approval ?

At each stage of the research design process, make sure that your choices are practically feasible.

Prevent plagiarism. Run a free check.

Within both qualitative and quantitative approaches, there are several types of research design to choose from. Each type provides a framework for the overall shape of your research.

Types of quantitative research designs

Quantitative designs can be split into four main types.

• Experimental and   quasi-experimental designs allow you to test cause-and-effect relationships
• Descriptive and correlational designs allow you to measure variables and describe relationships between them.

With descriptive and correlational designs, you can get a clear picture of characteristics, trends and relationships as they exist in the real world. However, you can’t draw conclusions about cause and effect (because correlation doesn’t imply causation ).

Experiments are the strongest way to test cause-and-effect relationships without the risk of other variables influencing the results. However, their controlled conditions may not always reflect how things work in the real world. They’re often also more difficult and expensive to implement.

Types of qualitative research designs

Qualitative designs are less strictly defined. This approach is about gaining a rich, detailed understanding of a specific context or phenomenon, and you can often be more creative and flexible in designing your research.

The table below shows some common types of qualitative design. They often have similar approaches in terms of data collection, but focus on different aspects when analyzing the data.

Your research design should clearly define who or what your research will focus on, and how you’ll go about choosing your participants or subjects.

In research, a population is the entire group that you want to draw conclusions about, while a sample is the smaller group of individuals you’ll actually collect data from.

Defining the population

A population can be made up of anything you want to study—plants, animals, organizations, texts, countries, etc. In the social sciences, it most often refers to a group of people.

For example, will you focus on people from a specific demographic, region or background? Are you interested in people with a certain job or medical condition, or users of a particular product?

The more precisely you define your population, the easier it will be to gather a representative sample.

• Sampling methods

Even with a narrowly defined population, it’s rarely possible to collect data from every individual. Instead, you’ll collect data from a sample.

To select a sample, there are two main approaches: probability sampling and non-probability sampling . The sampling method you use affects how confidently you can generalize your results to the population as a whole.

Probability sampling is the most statistically valid option, but it’s often difficult to achieve unless you’re dealing with a very small and accessible population.

For practical reasons, many studies use non-probability sampling, but it’s important to be aware of the limitations and carefully consider potential biases. You should always make an effort to gather a sample that’s as representative as possible of the population.

Case selection in qualitative research

In some types of qualitative designs, sampling may not be relevant.

For example, in an ethnography or a case study , your aim is to deeply understand a specific context, not to generalize to a population. Instead of sampling, you may simply aim to collect as much data as possible about the context you are studying.

In these types of design, you still have to carefully consider your choice of case or community. You should have a clear rationale for why this particular case is suitable for answering your research question .

For example, you might choose a case study that reveals an unusual or neglected aspect of your research problem, or you might choose several very similar or very different cases in order to compare them.

Data collection methods are ways of directly measuring variables and gathering information. They allow you to gain first-hand knowledge and original insights into your research problem.

You can choose just one data collection method, or use several methods in the same study.

Survey methods

Surveys allow you to collect data about opinions, behaviors, experiences, and characteristics by asking people directly. There are two main survey methods to choose from: questionnaires and interviews .

Observation methods

Observational studies allow you to collect data unobtrusively, observing characteristics, behaviors or social interactions without relying on self-reporting.

Observations may be conducted in real time, taking notes as you observe, or you might make audiovisual recordings for later analysis. They can be qualitative or quantitative.

Other methods of data collection

There are many other ways you might collect data depending on your field and topic.

If you’re not sure which methods will work best for your research design, try reading some papers in your field to see what kinds of data collection methods they used.

Secondary data

If you don’t have the time or resources to collect data from the population you’re interested in, you can also choose to use secondary data that other researchers already collected—for example, datasets from government surveys or previous studies on your topic.

With this raw data, you can do your own analysis to answer new research questions that weren’t addressed by the original study.

Using secondary data can expand the scope of your research, as you may be able to access much larger and more varied samples than you could collect yourself.

However, it also means you don’t have any control over which variables to measure or how to measure them, so the conclusions you can draw may be limited.

Here's why students love Scribbr's proofreading services

Discover proofreading & editing

As well as deciding on your methods, you need to plan exactly how you’ll use these methods to collect data that’s consistent, accurate, and unbiased.

Planning systematic procedures is especially important in quantitative research, where you need to precisely define your variables and ensure your measurements are high in reliability and validity.

Operationalization

Some variables, like height or age, are easily measured. But often you’ll be dealing with more abstract concepts, like satisfaction, anxiety, or competence. Operationalization means turning these fuzzy ideas into measurable indicators.

If you’re using observations , which events or actions will you count?

If you’re using surveys , which questions will you ask and what range of responses will be offered?

You may also choose to use or adapt existing materials designed to measure the concept you’re interested in—for example, questionnaires or inventories whose reliability and validity has already been established.

Reliability and validity

Reliability means your results can be consistently reproduced, while validity means that you’re actually measuring the concept you’re interested in.

For valid and reliable results, your measurement materials should be thoroughly researched and carefully designed. Plan your procedures to make sure you carry out the same steps in the same way for each participant.

If you’re developing a new questionnaire or other instrument to measure a specific concept, running a pilot study allows you to check its validity and reliability in advance.

Sampling procedures

As well as choosing an appropriate sampling method , you need a concrete plan for how you’ll actually contact and recruit your selected sample.

That means making decisions about things like:

• How many participants do you need for an adequate sample size?
• What inclusion and exclusion criteria will you use to identify eligible participants?
• How will you contact your sample—by mail, online, by phone, or in person?

If you’re using a probability sampling method , it’s important that everyone who is randomly selected actually participates in the study. How will you ensure a high response rate?

If you’re using a non-probability method , how will you avoid research bias and ensure a representative sample?

Data management

It’s also important to create a data management plan for organizing and storing your data.

Will you need to transcribe interviews or perform data entry for observations? You should anonymize and safeguard any sensitive data, and make sure it’s backed up regularly.

Keeping your data well-organized will save time when it comes to analyzing it. It can also help other researchers validate and add to your findings (high replicability ).

On its own, raw data can’t answer your research question. The last step of designing your research is planning how you’ll analyze the data.

Quantitative data analysis

In quantitative research, you’ll most likely use some form of statistical analysis . With statistics, you can summarize your sample data, make estimates, and test hypotheses.

Using descriptive statistics , you can summarize your sample data in terms of:

• The distribution of the data (e.g., the frequency of each score on a test)
• The central tendency of the data (e.g., the mean to describe the average score)
• The variability of the data (e.g., the standard deviation to describe how spread out the scores are)

The specific calculations you can do depend on the level of measurement of your variables.

Using inferential statistics , you can:

• Make estimates about the population based on your sample data.
• Test hypotheses about a relationship between variables.

Regression and correlation tests look for associations between two or more variables, while comparison tests (such as t tests and ANOVAs ) look for differences in the outcomes of different groups.

Your choice of statistical test depends on various aspects of your research design, including the types of variables you’re dealing with and the distribution of your data.

Qualitative data analysis

In qualitative research, your data will usually be very dense with information and ideas. Instead of summing it up in numbers, you’ll need to comb through the data in detail, interpret its meanings, identify patterns, and extract the parts that are most relevant to your research question.

Two of the most common approaches to doing this are thematic analysis and discourse analysis .

There are many other ways of analyzing qualitative data depending on the aims of your research. To get a sense of potential approaches, try reading some qualitative research papers in your field.

If you want to know more about the research process , methodology , research bias , or statistics , make sure to check out some of our other articles with explanations and examples.

• Simple random sampling
• Stratified sampling
• Cluster sampling
• Likert scales
• Reproducibility

 Statistics

• Null hypothesis
• Statistical power
• Probability distribution
• Effect size
• Poisson distribution

Research bias

• Optimism bias
• Cognitive bias
• Implicit bias
• Hawthorne effect
• Anchoring bias
• Explicit bias

A research design is a strategy for answering your   research question . It defines your overall approach and determines how you will collect and analyze data.

A well-planned research design helps ensure that your methods match your research aims, that you collect high-quality data, and that you use the right kind of analysis to answer your questions, utilizing credible sources . This allows you to draw valid , trustworthy conclusions.

Quantitative research designs can be divided into two main categories:

• Correlational and descriptive designs are used to investigate characteristics, averages, trends, and associations between variables.
• Experimental and quasi-experimental designs are used to test causal relationships .

Qualitative research designs tend to be more flexible. Common types of qualitative design include case study , ethnography , and grounded theory designs.

The priorities of a research design can vary depending on the field, but you usually have to specify:

• Your research questions and/or hypotheses
• Your overall approach (e.g., qualitative or quantitative )
• The type of design you’re using (e.g., a survey , experiment , or case study )
• Your data collection methods (e.g., questionnaires , observations)
• Your data collection procedures (e.g., operationalization , timing and data management)
• Your data analysis methods (e.g., statistical tests  or thematic analysis )

A sample is a subset of individuals from a larger population . Sampling means selecting the group that you will actually collect data from in your research. For example, if you are researching the opinions of students in your university, you could survey a sample of 100 students.

In statistics, sampling allows you to test a hypothesis about the characteristics of a population.

Operationalization means turning abstract conceptual ideas into measurable observations.

For example, the concept of social anxiety isn’t directly observable, but it can be operationally defined in terms of self-rating scores, behavioral avoidance of crowded places, or physical anxiety symptoms in social situations.

Before collecting data , it’s important to consider how you will operationalize the variables that you want to measure.

A research project is an academic, scientific, or professional undertaking to answer a research question . Research projects can take many forms, such as qualitative or quantitative , descriptive , longitudinal , experimental , or correlational . What kind of research approach you choose will depend on your topic.

Cite this Scribbr article

If you want to cite this source, you can copy and paste the citation or click the “Cite this Scribbr article” button to automatically add the citation to our free Citation Generator.

McCombes, S. (2023, November 20). What Is a Research Design | Types, Guide & Examples. Scribbr. Retrieved September 7, 2024, from https://www.scribbr.com/methodology/research-design/

Is this article helpful?

Shona McCombes

Other students also liked, guide to experimental design | overview, steps, & examples, how to write a research proposal | examples & templates, ethical considerations in research | types & examples, "i thought ai proofreading was useless but..".

I've been using Scribbr for years now and I know it's a service that won't disappoint. It does a good job spotting mistakes”

• Privacy Policy

Home » 500+ Quantitative Research Titles and Topics

500+ Quantitative Research Titles and Topics

Table of Contents

Quantitative research involves collecting and analyzing numerical data to identify patterns, trends, and relationships among variables. This method is widely used in social sciences, psychology , economics , and other fields where researchers aim to understand human behavior and phenomena through statistical analysis. If you are looking for a quantitative research topic, there are numerous areas to explore, from analyzing data on a specific population to studying the effects of a particular intervention or treatment. In this post, we will provide some ideas for quantitative research topics that may inspire you and help you narrow down your interests.

Quantitative Research Titles

Quantitative Research Titles are as follows:

Business and Economics

• “Statistical Analysis of Supply Chain Disruptions on Retail Sales”
• “Quantitative Examination of Consumer Loyalty Programs in the Fast Food Industry”
• “Predicting Stock Market Trends Using Machine Learning Algorithms”
• “Influence of Workplace Environment on Employee Productivity: A Quantitative Study”
• “Impact of Economic Policies on Small Businesses: A Regression Analysis”
• “Customer Satisfaction and Profit Margins: A Quantitative Correlation Study”
• “Analyzing the Role of Marketing in Brand Recognition: A Statistical Overview”
• “Quantitative Effects of Corporate Social Responsibility on Consumer Trust”
• “Price Elasticity of Demand for Luxury Goods: A Case Study”
• “The Relationship Between Fiscal Policy and Inflation Rates: A Time-Series Analysis”
• “Factors Influencing E-commerce Conversion Rates: A Quantitative Exploration”
• “Examining the Correlation Between Interest Rates and Consumer Spending”
• “Standardized Testing and Academic Performance: A Quantitative Evaluation”
• “Teaching Strategies and Student Learning Outcomes in Secondary Schools: A Quantitative Study”
• “The Relationship Between Extracurricular Activities and Academic Success”
• “Influence of Parental Involvement on Children’s Educational Achievements”
• “Digital Literacy in Primary Schools: A Quantitative Assessment”
• “Learning Outcomes in Blended vs. Traditional Classrooms: A Comparative Analysis”
• “Correlation Between Teacher Experience and Student Success Rates”
• “Analyzing the Impact of Classroom Technology on Reading Comprehension”
• “Gender Differences in STEM Fields: A Quantitative Analysis of Enrollment Data”
• “The Relationship Between Homework Load and Academic Burnout”
• “Assessment of Special Education Programs in Public Schools”
• “Role of Peer Tutoring in Improving Academic Performance: A Quantitative Study”

Medicine and Health Sciences

• “The Impact of Sleep Duration on Cardiovascular Health: A Cross-sectional Study”
• “Analyzing the Efficacy of Various Antidepressants: A Meta-Analysis”
• “Patient Satisfaction in Telehealth Services: A Quantitative Assessment”
• “Dietary Habits and Incidence of Heart Disease: A Quantitative Review”
• “Correlations Between Stress Levels and Immune System Functioning”
• “Smoking and Lung Function: A Quantitative Analysis”
• “Influence of Physical Activity on Mental Health in Older Adults”
• “Antibiotic Resistance Patterns in Community Hospitals: A Quantitative Study”
• “The Efficacy of Vaccination Programs in Controlling Disease Spread: A Time-Series Analysis”
• “Role of Social Determinants in Health Outcomes: A Quantitative Exploration”
• “Impact of Hospital Design on Patient Recovery Rates”
• “Quantitative Analysis of Dietary Choices and Obesity Rates in Children”

Social Sciences

• “Examining Social Inequality through Wage Distribution: A Quantitative Study”
• “Impact of Parental Divorce on Child Development: A Longitudinal Study”
• “Social Media and its Effect on Political Polarization: A Quantitative Analysis”
• “The Relationship Between Religion and Social Attitudes: A Statistical Overview”
• “Influence of Socioeconomic Status on Educational Achievement”
• “Quantifying the Effects of Community Programs on Crime Reduction”
• “Public Opinion and Immigration Policies: A Quantitative Exploration”
• “Analyzing the Gender Representation in Political Offices: A Quantitative Study”
• “Impact of Mass Media on Public Opinion: A Regression Analysis”
• “Influence of Urban Design on Social Interactions in Communities”
• “The Role of Social Support in Mental Health Outcomes: A Quantitative Analysis”
• “Examining the Relationship Between Substance Abuse and Employment Status”

Engineering and Technology

• “Performance Evaluation of Different Machine Learning Algorithms in Autonomous Vehicles”
• “Material Science: A Quantitative Analysis of Stress-Strain Properties in Various Alloys”
• “Impacts of Data Center Cooling Solutions on Energy Consumption”
• “Analyzing the Reliability of Renewable Energy Sources in Grid Management”
• “Optimization of 5G Network Performance: A Quantitative Assessment”
• “Quantifying the Effects of Aerodynamics on Fuel Efficiency in Commercial Airplanes”
• “The Relationship Between Software Complexity and Bug Frequency”
• “Machine Learning in Predictive Maintenance: A Quantitative Analysis”
• “Wearable Technologies and their Impact on Healthcare Monitoring”
• “Quantitative Assessment of Cybersecurity Measures in Financial Institutions”
• “Analysis of Noise Pollution from Urban Transportation Systems”
• “The Influence of Architectural Design on Energy Efficiency in Buildings”

Quantitative Research Topics

Quantitative Research Topics are as follows:

• The effects of social media on self-esteem among teenagers.
• A comparative study of academic achievement among students of single-sex and co-educational schools.
• The impact of gender on leadership styles in the workplace.
• The correlation between parental involvement and academic performance of students.
• The effect of mindfulness meditation on stress levels in college students.
• The relationship between employee motivation and job satisfaction.
• The effectiveness of online learning compared to traditional classroom learning.
• The correlation between sleep duration and academic performance among college students.
• The impact of exercise on mental health among adults.
• The relationship between social support and psychological well-being among cancer patients.
• The effect of caffeine consumption on sleep quality.
• A comparative study of the effectiveness of cognitive-behavioral therapy and pharmacotherapy in treating depression.
• The relationship between physical attractiveness and job opportunities.
• The correlation between smartphone addiction and academic performance among high school students.
• The impact of music on memory recall among adults.
• The effectiveness of parental control software in limiting children’s online activity.
• The relationship between social media use and body image dissatisfaction among young adults.
• The correlation between academic achievement and parental involvement among minority students.
• The impact of early childhood education on academic performance in later years.
• The effectiveness of employee training and development programs in improving organizational performance.
• The relationship between socioeconomic status and access to healthcare services.
• The correlation between social support and academic achievement among college students.
• The impact of technology on communication skills among children.
• The effectiveness of mindfulness-based stress reduction programs in reducing symptoms of anxiety and depression.
• The relationship between employee turnover and organizational culture.
• The correlation between job satisfaction and employee engagement.
• The impact of video game violence on aggressive behavior among children.
• The effectiveness of nutritional education in promoting healthy eating habits among adolescents.
• The relationship between bullying and academic performance among middle school students.
• The correlation between teacher expectations and student achievement.
• The impact of gender stereotypes on career choices among high school students.
• The effectiveness of anger management programs in reducing violent behavior.
• The relationship between social support and recovery from substance abuse.
• The correlation between parent-child communication and adolescent drug use.
• The impact of technology on family relationships.
• The effectiveness of smoking cessation programs in promoting long-term abstinence.
• The relationship between personality traits and academic achievement.
• The correlation between stress and job performance among healthcare professionals.
• The impact of online privacy concerns on social media use.
• The effectiveness of cognitive-behavioral therapy in treating anxiety disorders.
• The relationship between teacher feedback and student motivation.
• The correlation between physical activity and academic performance among elementary school students.
• The impact of parental divorce on academic achievement among children.
• The effectiveness of diversity training in improving workplace relationships.
• The relationship between childhood trauma and adult mental health.
• The correlation between parental involvement and substance abuse among adolescents.
• The impact of social media use on romantic relationships among young adults.
• The effectiveness of assertiveness training in improving communication skills.
• The relationship between parental expectations and academic achievement among high school students.
• The correlation between sleep quality and mood among adults.
• The impact of video game addiction on academic performance among college students.
• The effectiveness of group therapy in treating eating disorders.
• The relationship between job stress and job performance among teachers.
• The correlation between mindfulness and emotional regulation.
• The impact of social media use on self-esteem among college students.
• The effectiveness of parent-teacher communication in promoting academic achievement among elementary school students.
• The impact of renewable energy policies on carbon emissions
• The relationship between employee motivation and job performance
• The effectiveness of psychotherapy in treating eating disorders
• The correlation between physical activity and cognitive function in older adults
• The effect of childhood poverty on adult health outcomes
• The impact of urbanization on biodiversity conservation
• The relationship between work-life balance and employee job satisfaction
• The effectiveness of eye movement desensitization and reprocessing (EMDR) in treating trauma
• The correlation between parenting styles and child behavior
• The effect of social media on political polarization
• The impact of foreign aid on economic development
• The relationship between workplace diversity and organizational performance
• The effectiveness of dialectical behavior therapy in treating borderline personality disorder
• The correlation between childhood abuse and adult mental health outcomes
• The effect of sleep deprivation on cognitive function
• The impact of trade policies on international trade and economic growth
• The relationship between employee engagement and organizational commitment
• The effectiveness of cognitive therapy in treating postpartum depression
• The correlation between family meals and child obesity rates
• The effect of parental involvement in sports on child athletic performance
• The impact of social entrepreneurship on sustainable development
• The relationship between emotional labor and job burnout
• The effectiveness of art therapy in treating dementia
• The correlation between social media use and academic procrastination
• The effect of poverty on childhood educational attainment
• The impact of urban green spaces on mental health
• The relationship between job insecurity and employee well-being
• The effectiveness of virtual reality exposure therapy in treating anxiety disorders
• The correlation between childhood trauma and substance abuse
• The effect of screen time on children’s social skills
• The impact of trade unions on employee job satisfaction
• The relationship between cultural intelligence and cross-cultural communication
• The effectiveness of acceptance and commitment therapy in treating chronic pain
• The correlation between childhood obesity and adult health outcomes
• The effect of gender diversity on corporate performance
• The impact of environmental regulations on industry competitiveness.
• The impact of renewable energy policies on greenhouse gas emissions
• The relationship between workplace diversity and team performance
• The effectiveness of group therapy in treating substance abuse
• The correlation between parental involvement and social skills in early childhood
• The effect of technology use on sleep patterns
• The impact of government regulations on small business growth
• The relationship between job satisfaction and employee turnover
• The effectiveness of virtual reality therapy in treating anxiety disorders
• The correlation between parental involvement and academic motivation in adolescents
• The effect of social media on political engagement
• The impact of urbanization on mental health
• The relationship between corporate social responsibility and consumer trust
• The correlation between early childhood education and social-emotional development
• The effect of screen time on cognitive development in young children
• The impact of trade policies on global economic growth
• The relationship between workplace diversity and innovation
• The effectiveness of family therapy in treating eating disorders
• The correlation between parental involvement and college persistence
• The effect of social media on body image and self-esteem
• The impact of environmental regulations on business competitiveness
• The relationship between job autonomy and job satisfaction
• The effectiveness of virtual reality therapy in treating phobias
• The correlation between parental involvement and academic achievement in college
• The effect of social media on sleep quality
• The impact of immigration policies on social integration
• The relationship between workplace diversity and employee well-being
• The effectiveness of psychodynamic therapy in treating personality disorders
• The correlation between early childhood education and executive function skills
• The effect of parental involvement on STEM education outcomes
• The impact of trade policies on domestic employment rates
• The relationship between job insecurity and mental health
• The effectiveness of exposure therapy in treating PTSD
• The correlation between parental involvement and social mobility
• The effect of social media on intergroup relations
• The impact of urbanization on air pollution and respiratory health.
• The relationship between emotional intelligence and leadership effectiveness
• The effectiveness of cognitive-behavioral therapy in treating depression
• The correlation between early childhood education and language development
• The effect of parental involvement on academic achievement in STEM fields
• The impact of trade policies on income inequality
• The relationship between workplace diversity and customer satisfaction
• The effectiveness of mindfulness-based therapy in treating anxiety disorders
• The correlation between parental involvement and civic engagement in adolescents
• The effect of social media on mental health among teenagers
• The impact of public transportation policies on traffic congestion
• The relationship between job stress and job performance
• The effectiveness of group therapy in treating depression
• The correlation between early childhood education and cognitive development
• The effect of parental involvement on academic motivation in college
• The impact of environmental regulations on energy consumption
• The relationship between workplace diversity and employee engagement
• The effectiveness of art therapy in treating PTSD
• The correlation between parental involvement and academic success in vocational education
• The effect of social media on academic achievement in college
• The impact of tax policies on economic growth
• The relationship between job flexibility and work-life balance
• The effectiveness of acceptance and commitment therapy in treating anxiety disorders
• The correlation between early childhood education and social competence
• The effect of parental involvement on career readiness in high school
• The impact of immigration policies on crime rates
• The relationship between workplace diversity and employee retention
• The effectiveness of play therapy in treating trauma
• The correlation between parental involvement and academic success in online learning
• The effect of social media on body dissatisfaction among women
• The impact of urbanization on public health infrastructure
• The relationship between job satisfaction and job performance
• The effectiveness of eye movement desensitization and reprocessing therapy in treating PTSD
• The correlation between early childhood education and social skills in adolescence
• The effect of parental involvement on academic achievement in the arts
• The impact of trade policies on foreign investment
• The relationship between workplace diversity and decision-making
• The effectiveness of exposure and response prevention therapy in treating OCD
• The correlation between parental involvement and academic success in special education
• The impact of zoning laws on affordable housing
• The relationship between job design and employee motivation
• The effectiveness of cognitive rehabilitation therapy in treating traumatic brain injury
• The correlation between early childhood education and social-emotional learning
• The effect of parental involvement on academic achievement in foreign language learning
• The impact of trade policies on the environment
• The relationship between workplace diversity and creativity
• The effectiveness of emotion-focused therapy in treating relationship problems
• The correlation between parental involvement and academic success in music education
• The effect of social media on interpersonal communication skills
• The impact of public health campaigns on health behaviors
• The relationship between job resources and job stress
• The effectiveness of equine therapy in treating substance abuse
• The correlation between early childhood education and self-regulation
• The effect of parental involvement on academic achievement in physical education
• The impact of immigration policies on cultural assimilation
• The relationship between workplace diversity and conflict resolution
• The effectiveness of schema therapy in treating personality disorders
• The correlation between parental involvement and academic success in career and technical education
• The effect of social media on trust in government institutions
• The impact of urbanization on public transportation systems
• The relationship between job demands and job stress
• The correlation between early childhood education and executive functioning
• The effect of parental involvement on academic achievement in computer science
• The effectiveness of cognitive processing therapy in treating PTSD
• The correlation between parental involvement and academic success in homeschooling
• The effect of social media on cyberbullying behavior
• The impact of urbanization on air quality
• The effectiveness of dance therapy in treating anxiety disorders
• The correlation between early childhood education and math achievement
• The effect of parental involvement on academic achievement in health education
• The impact of global warming on agriculture
• The effectiveness of narrative therapy in treating depression
• The correlation between parental involvement and academic success in character education
• The effect of social media on political participation
• The impact of technology on job displacement
• The relationship between job resources and job satisfaction
• The effectiveness of art therapy in treating addiction
• The correlation between early childhood education and reading comprehension
• The effect of parental involvement on academic achievement in environmental education
• The impact of income inequality on social mobility
• The relationship between workplace diversity and organizational culture
• The effectiveness of solution-focused brief therapy in treating anxiety disorders
• The correlation between parental involvement and academic success in physical therapy education
• The effect of social media on misinformation
• The impact of green energy policies on economic growth
• The relationship between job demands and employee well-being
• The correlation between early childhood education and science achievement
• The effect of parental involvement on academic achievement in religious education
• The impact of gender diversity on corporate governance
• The relationship between workplace diversity and ethical decision-making
• The correlation between parental involvement and academic success in dental hygiene education
• The effect of social media on self-esteem among adolescents
• The impact of renewable energy policies on energy security
• The effect of parental involvement on academic achievement in social studies
• The impact of trade policies on job growth
• The relationship between workplace diversity and leadership styles
• The correlation between parental involvement and academic success in online vocational training
• The effect of social media on self-esteem among men
• The impact of urbanization on air pollution levels
• The effectiveness of music therapy in treating depression
• The correlation between early childhood education and math skills
• The effect of parental involvement on academic achievement in language arts
• The impact of immigration policies on labor market outcomes
• The effectiveness of hypnotherapy in treating phobias
• The effect of social media on political engagement among young adults
• The impact of urbanization on access to green spaces
• The relationship between job crafting and job satisfaction
• The effectiveness of exposure therapy in treating specific phobias
• The correlation between early childhood education and spatial reasoning
• The effect of parental involvement on academic achievement in business education
• The impact of trade policies on economic inequality
• The effectiveness of narrative therapy in treating PTSD
• The correlation between parental involvement and academic success in nursing education
• The effect of social media on sleep quality among adolescents
• The impact of urbanization on crime rates
• The relationship between job insecurity and turnover intentions
• The effectiveness of pet therapy in treating anxiety disorders
• The correlation between early childhood education and STEM skills
• The effect of parental involvement on academic achievement in culinary education
• The impact of immigration policies on housing affordability
• The relationship between workplace diversity and employee satisfaction
• The effectiveness of mindfulness-based stress reduction in treating chronic pain
• The correlation between parental involvement and academic success in art education
• The effect of social media on academic procrastination among college students
• The impact of urbanization on public safety services.

About the author

Muhammad Hassan

Researcher, Academic Writer, Web developer

You may also like

300+ AP Research Topic Ideas

200+ Funny Research Topics

300+ American History Research Paper Topics

300+ Science Research Topics

500+ Music Research Topics

500+ Educational Research Topics

• USC Libraries
• Research Guides

Organizing Your Social Sciences Research Paper

• Choosing a Title
• Purpose of Guide
• Design Flaws to Avoid
• Independent and Dependent Variables
• Glossary of Research Terms
• Reading Research Effectively
• Narrowing a Topic Idea
• Broadening a Topic Idea
• Extending the Timeliness of a Topic Idea
• Academic Writing Style
• Applying Critical Thinking
• Making an Outline
• Paragraph Development
• Research Process Video Series
• Executive Summary
• The C.A.R.S. Model
• Background Information
• The Research Problem/Question
• Theoretical Framework
• Citation Tracking
• Content Alert Services
• Evaluating Sources
• Primary Sources
• Secondary Sources
• Tiertiary Sources
• Scholarly vs. Popular Publications
• Qualitative Methods
• Quantitative Methods
• Insiderness
• Using Non-Textual Elements
• Limitations of the Study
• Common Grammar Mistakes
• Writing Concisely
• Avoiding Plagiarism
• Footnotes or Endnotes?
• Further Readings
• Generative AI and Writing
• USC Libraries Tutorials and Other Guides
• Bibliography

The title summarizes the main idea or ideas of your study. A good title contains the fewest possible words needed to adequately describe the content and/or purpose of your research paper.

Importance of Choosing a Good Title

When searching for research on a topic, the title is almost always read first because it is the key identifier of what is being studied . Given this, it is the most important element that defines the research study. With this in mind, avoid the following when creating a title:

• A title should not be too long. If it is lengthy, this usually means there are too many unnecessary words. Avoid language, such as, "A Study to Investigate the...," or "An Examination of the...." These phrases are obvious and generally superfluous unless they are necessary to covey the scope, intent, or type of study.
• On the other hand, a title which is too short often uses words which are too broad or general and, thus, does not tell the reader what is being studied. For example, a paper with the title, "African Politics" is so non-specific the title could be the title of a book and so ambiguous that it could refer to anything associated with politics in Africa. A good title should provide information about the focus and/or scope of your research study.
• In academic writing, catchy phrases or non-specific language may be used, but only if it's within the context of the study [e.g., "Fair and Impartial Jury--Catch as Catch Can"]. However, in most cases, you should avoid including words or phrases that do not help the reader understand the purpose of your paper. An exception to a catchy phrase could be a short quotation derived from a source used in your study that grabs the reader's attention. However, the quote must be clearly relevant to the topic of the paper.
• Academic writing is a serious and deliberate endeavor. Avoid using humorous or clever journalistic styles of phrasing when creating the title to your paper. Journalistic headlines often use emotional adjectives [e.g., incredible, amazing, effortless] to highlight a problem experienced by the reader or use "trigger words" or interrogative words like how, what, when, or why to persuade people to read the article or click on a link. These approaches are viewed as counter-productive in academic writing. A reader does not need clever or humorous titles to catch their attention because the act of reading research is assumed to be deliberate based on a desire to learn and improve understanding of the problem. In addition, a humorous title can detract from the seriousness and authority of your research. 
• Unlike everywhere else in a college-level social sciences research paper [except when using direct quotes], titles do not have to adhere to rigid grammatical or stylistic standards. For example, it could be appropriate to begin a title with a coordinating conjunction [i.e., and, but, or, nor, for, so, yet] if it makes sense to do so and does not detract from the purpose of the study [e.g., "Yet Another Look at Mutual Fund Tournaments"] or beginning the title with an inflected form of a verb such as those ending in -ing [e.g., "Assessing the Political Landscape: Structure, Cognition, and Power in Organizations"].

Appiah, Kingsley Richard et al. “Structural Organisation of Research Article Titles: A Comparative Study of Titles of Business, Gynaecology and Law.” Advances in Language and Literary Studies 10 (2019); Hartley James. “To Attract or to Inform: What are Titles for?” Journal of Technical Writing and Communication 35 (2005): 203-213; Jaakkola, Maarit. “Journalistic Writing and Style.” In Oxford Research Encyclopedia of Communication . Jon F. Nussbaum, editor. (New York: Oxford University Press, 2018): https://oxfordre.com/communication.

Structure and Writing Style

The following parameters can be used to help you formulate a suitable research paper title:

• The purpose of the research
• The scope of the research
• The narrative tone of the paper [typically defined by the type of the research]
• The methods used to study the problem

The initial aim of a title is to capture the reader’s attention by highlighting the research problem under investigation.

Create a Working Title Typically, the final title you submit to your professor is created after the research is complete so that the title accurately captures what has been done . The working title should be developed early in the research process because it can help anchor the focus of your study in much the same way the research problem does. Referring back to the working title can help you reorient yourself back to the main purpose of the study if you find yourself drifting off on a tangent while researching and writing your paper. The Final Title Effective titles in research papers have a number of characteristics that reflect general principles of academic writing.

• Indicate accurately the subject and scope of the study,
• Rarely use abbreviations or acronyms unless they are commonly known,
• Use words that create a positive impression and stimulate reader interest,
• Use current nomenclature from the field of study,
• Identify key variables, both dependent and independent,
• Reveal how the paper will be organized,
• Suggest a relationship between variables which supports the major hypothesis,
• Is limited to 5 to 12 substantive words,
• Does not include redundant phrasing, such as, "A Study of," "An Analysis of" or similar constructions,
• Takes the form of a question or declarative statement,
• If you use a quote as part of the title, the source of the quote is cited [usually using an asterisk and footnote],
• Use correct grammar and capitalization with all first words and last words capitalized, including the first word of a subtitle. All nouns, pronouns, verbs, adjectives, and adverbs that appear between the first and last words of the title are also capitalized, and
• Avoid using an exclamation mark at the end of the title.

The Subtitle Subtitles are frequently used in social sciences research papers because it helps the reader understand the scope of the study in relation to how it was designed to address the research problem. Often, the main title describes the problem and the subtitle clarifies the context, highlights the method of analysis, or identifies the research setting. Think about what type of subtitle listed below reflects the overall approach to your study and whether you believe a subtitle is needed to emphasize the investigative parameters of your research.

1.  Explains or provides additional context , e.g., "Linguistic Ethnography and the Study of Welfare Institutions as a Flow of Social Practices: The Case of Residential Child Care Institutions as Paradoxical Institutions." [Palomares, Manuel and David Poveda.  Text & Talk: An Interdisciplinary Journal of Language, Discourse and Communication Studies 30 (January 2010): 193-212]

2.  Adds substance to a literary, provocative, or imaginative title or quote , e.g., "Listen to What I Say, Not How I Vote": Congressional Support for the President in Washington and at Home." [Grose, Christian R. and Keesha M. Middlemass. Social Science Quarterly 91 (March 2010): 143-167]

3.  Qualifies the geographic scope of the research , e.g., "The Geopolitics of the Eastern Border of the European Union: The Case of Romania-Moldova-Ukraine." [Marcu, Silvia. Geopolitics 14 (August 2009): 409-432]

4.  Qualifies the temporal scope of the research , e.g., "A Comparison of the Progressive Era and the Depression Years: Societal Influences on Predictions of the Future of the Library, 1895-1940." [Grossman, Hal B. Libraries & the Cultural Record 46 (2011): 102-128]

5.  Focuses on investigating the ideas, theories, or work of a particular individual , e.g., "A Deliberative Conception of Politics: How Francesco Saverio Merlino Related Anarchy and Democracy." [La Torre, Massimo. Sociologia del Diritto 28 (January 2001): 75 - 98]

6.  Identifies the methodology used , e.g. "Student Activism of the 1960s Revisited: A Multivariate Analysis Research Note." [Aron, William S. Social Forces 52 (March 1974): 408-414]

7.  Defines the overarching technique for analyzing the research problem , e.g., "Explaining Territorial Change in Federal Democracies: A Comparative Historical Institutionalist Approach." [ Tillin, Louise. Political Studies 63 (August 2015): 626-641.

With these examples in mind, think about what type of subtitle reflects the overall approach to your study. This will help the reader understand the scope of the study in relation to how it was designed to address the research problem. Keep in mind, however, that although subtitles are commonly used by scholars, they are not required.

Anstey, A. “Writing Style: What's in a Title?” British Journal of Dermatology 170 (May 2014): 1003-1004; Balch, Tucker. How to Compose a Title for Your Research Paper. Augmented Trader blog. School of Interactive Computing, Georgia Tech University; Bavdekar, Sandeep B. “Formulating the Right Title for a Research Article.” Journal of Association of Physicians of India 64 (February 2016); Choosing the Proper Research Paper Titles. AplusReports.com, 2007-2012; Eva, Kevin W. “Titles, Abstracts, and Authors.” In How to Write a Paper . George M. Hall, editor. 5th edition. (Oxford: John Wiley and Sons, 2013), pp. 33-41; Hartley James. “To Attract or to Inform: What are Titles for?” Journal of Technical Writing and Communication 35 (2005): 203-213; General Format. The Writing Lab and The OWL. Purdue University; Kerkut G.A. “Choosing a Title for a Paper.” Comparative Biochemistry and Physiology Part A: Physiology 74 (1983): 1; “Tempting Titles.” In Stylish Academic Writing . Helen Sword, editor. (Cambridge, MA: Harvard University Press, 2012), pp. 63-75; Nundy, Samiran, et al. “How to Choose a Title?” In How to Practice Academic Medicine and Publish from Developing Countries? A Practical Guide . Edited by Samiran Nundy, Atul Kakar, and Zulfiqar A. Bhutta. (Springer Singapore, 2022), pp. 185-192.

• << Previous: Applying Critical Thinking
• Next: Making an Outline >>
• Last Updated: Sep 4, 2024 9:40 AM
• URL: https://libguides.usc.edu/writingguide

• Affiliate Program

• UNITED STATES
• 台灣 (TAIWAN)
• TÜRKIYE (TURKEY)
• Academic Editing Services
• - Research Paper
• - Journal Manuscript
• - Dissertation
• - College & University Assignments
• Admissions Editing Services
• - Application Essay
• - Personal Statement
• - Recommendation Letter
• - Cover Letter
• - CV/Resume
• Business Editing Services
• - Business Documents
• - Report & Brochure
• - Website & Blog
• Writer Editing Services
• - Script & Screenplay
• Our Editors
• Client Reviews
• Editing & Proofreading Prices
• Wordvice Points
• Partner Discount
• Plagiarism Checker
• APA Citation Generator
• MLA Citation Generator
• Chicago Citation Generator
• Vancouver Citation Generator
• - APA Style
• - MLA Style
• - Chicago Style
• - Vancouver Style
• Writing & Editing Guide
• Academic Resources
• Admissions Resources

How to Make a Research Paper Title with Examples

What is a research paper title and why does it matter?

A research paper title summarizes the aim and purpose of your research study. Making a title for your research is one of the most important decisions when writing an article to publish in journals. The research title is the first thing that journal editors and reviewers see when they look at your paper and the only piece of information that fellow researchers will see in a database or search engine query. Good titles that are concise and contain all the relevant terms have been shown to increase citation counts and Altmetric scores .

Therefore, when you title research work, make sure it captures all of the relevant aspects of your study, including the specific topic and problem being investigated. It also should present these elements in a way that is accessible and will captivate readers. Follow these steps to learn how to make a good research title for your work.

How to Make a Research Paper Title in 5 Steps

You might wonder how you are supposed to pick a title from all the content that your manuscript contains—how are you supposed to choose? What will make your research paper title come up in search engines and what will make the people in your field read it? 

In a nutshell, your research title should accurately capture what you have done, it should sound interesting to the people who work on the same or a similar topic, and it should contain the important title keywords that other researchers use when looking for literature in databases. To make the title writing process as simple as possible, we have broken it down into 5 simple steps.

Step 1: Answer some key questions about your research paper

What does your paper seek to answer and what does it accomplish? Try to answer these questions as briefly as possible. You can create these questions by going through each section of your paper and finding the MOST relevant information to make a research title.

Step 2: Identify research study keywords

Now that you have answers to your research questions, find the most important parts of these responses and make these your study keywords. Note that you should only choose the most important terms for your keywords–journals usually request anywhere from 3 to 8 keywords maximum.

Step 3: Research title writing: use these keywords

“We employed a case study of 60 liver transplant patients around the US aged 20-50 years to assess how waiting list volume affects the outcomes of liver transplantation in patients; results indicate a positive correlation between increased waiting list volume and negative prognosis after the transplant procedure.”

The sentence above is clearly much too long for a research paper title. This is why you will trim and polish your title in the next two steps.

Step 4: Create a working research paper title

To create a working title, remove elements that make it a complete “sentence” but keep everything that is important to what the study is about. Delete all unnecessary and redundant words that are not central to the study or that researchers would most likely not use in a database search.

“ We employed a case study of 60 liver transplant patients around the US aged 20-50 years to assess how the waiting list volume affects the outcome of liver transplantation in patients ; results indicate a positive correlation between increased waiting list volume and a negative prognosis after transplant procedure ”

Now shift some words around for proper syntax and rephrase it a bit to shorten the length and make it leaner and more natural. What you are left with is:

“A case study of 60 liver transplant patients around the US aged 20-50 years assessing the impact of waiting list volume on outcome of transplantation and showing a positive correlation between increased waiting list volume and a negative prognosis” (Word Count: 38)

This text is getting closer to what we want in a research title, which is just the most important information. But note that the word count for this working title is still 38 words, whereas the average length of published journal article titles is 16 words or fewer. Therefore, we should eliminate some words and phrases that are not essential to this title.

Step 5: Remove any nonessential words and phrases from your title

Because the number of patients studied and the exact outcome are not the most essential parts of this paper, remove these elements first:

 “A case study of 60 liver transplant patients around the US aged 20-50 years assessing the impact of waiting list volume on outcomes of transplantation and showing a positive correlation between increased waiting list volume and a negative prognosis” (Word Count: 19)

In addition, the methods used in a study are not usually the most searched-for keywords in databases and represent additional details that you may want to remove to make your title leaner. So what is left is:

“Assessing the impact of waiting list volume on outcome and prognosis in liver transplantation patients” (Word Count: 15)

In this final version of the title, one can immediately recognize the subject and what objectives the study aims to achieve. Note that the most important terms appear at the beginning and end of the title: “Assessing,” which is the main action of the study, is placed at the beginning; and “liver transplantation patients,” the specific subject of the study, is placed at the end.

This will aid significantly in your research paper title being found in search engines and database queries, which means that a lot more researchers will be able to locate your article once it is published. In fact, a 2014 review of more than 150,000 papers submitted to the UK’s Research Excellence Framework (REF) database found the style of a paper’s title impacted the number of citations it would typically receive. In most disciplines, articles with shorter, more concise titles yielded more citations.

Adding a Research Paper Subtitle

If your title might require a subtitle to provide more immediate details about your methodology or sample, you can do this by adding this information after a colon:

“ : a case study of US adult patients ages 20-25”

If we abide strictly by our word count rule this may not be necessary or recommended. But every journal has its own standard formatting and style guidelines for research paper titles, so it is a good idea to be aware of the specific journal author instructions , not just when you write the manuscript but also to decide how to create a good title for it.

Research Paper Title Examples

The title examples in the following table illustrate how a title can be interesting but incomplete, complete by uninteresting, complete and interesting but too informal in tone, or some other combination of these. A good research paper title should meet all the requirements in the four columns below.

Tips on Formulating a Good Research Paper Title

In addition to the steps given above, there are a few other important things you want to keep in mind when it comes to how to write a research paper title, regarding formatting, word count, and content:

• Write the title after you’ve written your paper and abstract
• Include all of the essential terms in your paper
• Keep it short and to the point (~16 words or fewer)
• Avoid unnecessary jargon and abbreviations
• Use keywords that capture the content of your paper
• Never include a period at the end—your title is NOT a sentence

Research Paper Writing Resources

We hope this article has been helpful in teaching you how to craft your research paper title. But you might still want to dig deeper into different journal title formats and categories that might be more suitable for specific article types or need help with writing a cover letter for your manuscript submission.

In addition to getting English proofreading services , including paper editing services , before submission to journals, be sure to visit our academic resources papers. Here you can find dozens of articles on manuscript writing, from drafting an outline to finding a target journal to submit to.

An official website of the United States government

The .gov means it’s official. Federal government websites often end in .gov or .mil. Before sharing sensitive information, make sure you’re on a federal government site.

The site is secure. The https:// ensures that you are connecting to the official website and that any information you provide is encrypted and transmitted securely.

• Publications
• Account settings

Preview improvements coming to the PMC website in October 2024. Learn More or Try it out now .

• Advanced Search
• Journal List
• Saudi J Anaesth
• v.13(Suppl 1); 2019 Apr

Writing the title and abstract for a research paper: Being concise, precise, and meticulous is the key

Milind s. tullu.

Department of Pediatrics, Seth G.S. Medical College and KEM Hospital, Parel, Mumbai, Maharashtra, India

This article deals with formulating a suitable title and an appropriate abstract for an original research paper. The “title” and the “abstract” are the “initial impressions” of a research article, and hence they need to be drafted correctly, accurately, carefully, and meticulously. Often both of these are drafted after the full manuscript is ready. Most readers read only the title and the abstract of a research paper and very few will go on to read the full paper. The title and the abstract are the most important parts of a research paper and should be pleasant to read. The “title” should be descriptive, direct, accurate, appropriate, interesting, concise, precise, unique, and should not be misleading. The “abstract” needs to be simple, specific, clear, unbiased, honest, concise, precise, stand-alone, complete, scholarly, (preferably) structured, and should not be misrepresentative. The abstract should be consistent with the main text of the paper, especially after a revision is made to the paper and should include the key message prominently. It is very important to include the most important words and terms (the “keywords”) in the title and the abstract for appropriate indexing purpose and for retrieval from the search engines and scientific databases. Such keywords should be listed after the abstract. One must adhere to the instructions laid down by the target journal with regard to the style and number of words permitted for the title and the abstract.

Introduction

This article deals with drafting a suitable “title” and an appropriate “abstract” for an original research paper. Because the “title” and the “abstract” are the “initial impressions” or the “face” of a research article, they need to be drafted correctly, accurately, carefully, meticulously, and consume time and energy.[ 1 , 2 , 3 , 4 , 5 , 6 , 7 , 8 , 9 , 10 ] Often, these are drafted after the complete manuscript draft is ready.[ 2 , 3 , 4 , 5 , 9 , 10 , 11 ] Most readers will read only the title and the abstract of a published research paper, and very few “interested ones” (especially, if the paper is of use to them) will go on to read the full paper.[ 1 , 2 ] One must remember to adhere to the instructions laid down by the “target journal” (the journal for which the author is writing) regarding the style and number of words permitted for the title and the abstract.[ 2 , 4 , 5 , 7 , 8 , 9 , 12 ] Both the title and the abstract are the most important parts of a research paper – for editors (to decide whether to process the paper for further review), for reviewers (to get an initial impression of the paper), and for the readers (as these may be the only parts of the paper available freely and hence, read widely).[ 4 , 8 , 12 ] It may be worth for the novice author to browse through titles and abstracts of several prominent journals (and their target journal as well) to learn more about the wording and styles of the titles and abstracts, as well as the aims and scope of the particular journal.[ 5 , 7 , 9 , 13 ]

The details of the title are discussed under the subheadings of importance, types, drafting, and checklist.

Importance of the title

When a reader browses through the table of contents of a journal issue (hard copy or on website), the title is the “ first detail” or “face” of the paper that is read.[ 2 , 3 , 4 , 5 , 6 , 13 ] Hence, it needs to be simple, direct, accurate, appropriate, specific, functional, interesting, attractive/appealing, concise/brief, precise/focused, unambiguous, memorable, captivating, informative (enough to encourage the reader to read further), unique, catchy, and it should not be misleading.[ 1 , 2 , 3 , 4 , 5 , 6 , 9 , 12 ] It should have “just enough details” to arouse the interest and curiosity of the reader so that the reader then goes ahead with studying the abstract and then (if still interested) the full paper.[ 1 , 2 , 4 , 13 ] Journal websites, electronic databases, and search engines use the words in the title and abstract (the “keywords”) to retrieve a particular paper during a search; hence, the importance of these words in accessing the paper by the readers has been emphasized.[ 3 , 4 , 5 , 6 , 12 , 14 ] Such important words (or keywords) should be arranged in appropriate order of importance as per the context of the paper and should be placed at the beginning of the title (rather than the later part of the title, as some search engines like Google may just display only the first six to seven words of the title).[ 3 , 5 , 12 ] Whimsical, amusing, or clever titles, though initially appealing, may be missed or misread by the busy reader and very short titles may miss the essential scientific words (the “keywords”) used by the indexing agencies to catch and categorize the paper.[ 1 , 3 , 4 , 9 ] Also, amusing or hilarious titles may be taken less seriously by the readers and may be cited less often.[ 4 , 15 ] An excessively long or complicated title may put off the readers.[ 3 , 9 ] It may be a good idea to draft the title after the main body of the text and the abstract are drafted.[ 2 , 3 , 4 , 5 ]

Types of titles

Titles can be descriptive, declarative, or interrogative. They can also be classified as nominal, compound, or full-sentence titles.

Descriptive or neutral title

This has the essential elements of the research theme, that is, the patients/subjects, design, interventions, comparisons/control, and outcome, but does not reveal the main result or the conclusion.[ 3 , 4 , 12 , 16 ] Such a title allows the reader to interpret the findings of the research paper in an impartial manner and with an open mind.[ 3 ] These titles also give complete information about the contents of the article, have several keywords (thus increasing the visibility of the article in search engines), and have increased chances of being read and (then) being cited as well.[ 4 ] Hence, such descriptive titles giving a glimpse of the paper are generally preferred.[ 4 , 16 ]

Declarative title

This title states the main finding of the study in the title itself; it reduces the curiosity of the reader, may point toward a bias on the part of the author, and hence is best avoided.[ 3 , 4 , 12 , 16 ]

Interrogative title

This is the one which has a query or the research question in the title.[ 3 , 4 , 16 ] Though a query in the title has the ability to sensationalize the topic, and has more downloads (but less citations), it can be distracting to the reader and is again best avoided for a research article (but can, at times, be used for a review article).[ 3 , 6 , 16 , 17 ]

From a sentence construct point of view, titles may be nominal (capturing only the main theme of the study), compound (with subtitles to provide additional relevant information such as context, design, location/country, temporal aspect, sample size, importance, and a provocative or a literary; for example, see the title of this review), or full-sentence titles (which are longer and indicate an added degree of certainty of the results).[ 4 , 6 , 9 , 16 ] Any of these constructs may be used depending on the type of article, the key message, and the author's preference or judgement.[ 4 ]

Drafting a suitable title

A stepwise process can be followed to draft the appropriate title. The author should describe the paper in about three sentences, avoiding the results and ensuring that these sentences contain important scientific words/keywords that describe the main contents and subject of the paper.[ 1 , 4 , 6 , 12 ] Then the author should join the sentences to form a single sentence, shorten the length (by removing redundant words or adjectives or phrases), and finally edit the title (thus drafted) to make it more accurate, concise (about 10–15 words), and precise.[ 1 , 3 , 4 , 5 , 9 ] Some journals require that the study design be included in the title, and this may be placed (using a colon) after the primary title.[ 2 , 3 , 4 , 14 ] The title should try to incorporate the Patients, Interventions, Comparisons and Outcome (PICO).[ 3 ] The place of the study may be included in the title (if absolutely necessary), that is, if the patient characteristics (such as study population, socioeconomic conditions, or cultural practices) are expected to vary as per the country (or the place of the study) and have a bearing on the possible outcomes.[ 3 , 6 ] Lengthy titles can be boring and appear unfocused, whereas very short titles may not be representative of the contents of the article; hence, optimum length is required to ensure that the title explains the main theme and content of the manuscript.[ 4 , 5 , 9 ] Abbreviations (except the standard or commonly interpreted ones such as HIV, AIDS, DNA, RNA, CDC, FDA, ECG, and EEG) or acronyms should be avoided in the title, as a reader not familiar with them may skip such an article and nonstandard abbreviations may create problems in indexing the article.[ 3 , 4 , 5 , 6 , 9 , 12 ] Also, too much of technical jargon or chemical formulas in the title may confuse the readers and the article may be skipped by them.[ 4 , 9 ] Numerical values of various parameters (stating study period or sample size) should also be avoided in the titles (unless deemed extremely essential).[ 4 ] It may be worthwhile to take an opinion from a impartial colleague before finalizing the title.[ 4 , 5 , 6 ] Thus, multiple factors (which are, at times, a bit conflicting or contrasting) need to be considered while formulating a title, and hence this should not be done in a hurry.[ 4 , 6 ] Many journals ask the authors to draft a “short title” or “running head” or “running title” for printing in the header or footer of the printed paper.[ 3 , 12 ] This is an abridged version of the main title of up to 40–50 characters, may have standard abbreviations, and helps the reader to navigate through the paper.[ 3 , 12 , 14 ]

Checklist for a good title

Table 1 gives a checklist/useful tips for drafting a good title for a research paper.[ 1 , 2 , 3 , 4 , 5 , 6 , 12 ] Table 2 presents some of the titles used by the author of this article in his earlier research papers, and the appropriateness of the titles has been commented upon. As an individual exercise, the reader may try to improvise upon the titles (further) after reading the corresponding abstract and full paper.

Checklist/useful tips for drafting a good title for a research paper

Some titles used by author of this article in his earlier publications and remark/comment on their appropriateness

The Abstract

The details of the abstract are discussed under the subheadings of importance, types, drafting, and checklist.

Importance of the abstract

The abstract is a summary or synopsis of the full research paper and also needs to have similar characteristics like the title. It needs to be simple, direct, specific, functional, clear, unbiased, honest, concise, precise, self-sufficient, complete, comprehensive, scholarly, balanced, and should not be misleading.[ 1 , 2 , 3 , 7 , 8 , 9 , 10 , 11 , 13 , 17 ] Writing an abstract is to extract and summarize (AB – absolutely, STR – straightforward, ACT – actual data presentation and interpretation).[ 17 ] The title and abstracts are the only sections of the research paper that are often freely available to the readers on the journal websites, search engines, and in many abstracting agencies/databases, whereas the full paper may attract a payment per view or a fee for downloading the pdf copy.[ 1 , 2 , 3 , 7 , 8 , 10 , 11 , 13 , 14 ] The abstract is an independent and stand-alone (that is, well understood without reading the full paper) section of the manuscript and is used by the editor to decide the fate of the article and to choose appropriate reviewers.[ 2 , 7 , 10 , 12 , 13 ] Even the reviewers are initially supplied only with the title and the abstract before they agree to review the full manuscript.[ 7 , 13 ] This is the second most commonly read part of the manuscript, and therefore it should reflect the contents of the main text of the paper accurately and thus act as a “real trailer” of the full article.[ 2 , 7 , 11 ] The readers will go through the full paper only if they find the abstract interesting and relevant to their practice; else they may skip the paper if the abstract is unimpressive.[ 7 , 8 , 9 , 10 , 13 ] The abstract needs to highlight the selling point of the manuscript and succeed in luring the reader to read the complete paper.[ 3 , 7 ] The title and the abstract should be constructed using keywords (key terms/important words) from all the sections of the main text.[ 12 ] Abstracts are also used for submitting research papers to a conference for consideration for presentation (as oral paper or poster).[ 9 , 13 , 17 ] Grammatical and typographic errors reflect poorly on the quality of the abstract, may indicate carelessness/casual attitude on part of the author, and hence should be avoided at all times.[ 9 ]

Types of abstracts

The abstracts can be structured or unstructured. They can also be classified as descriptive or informative abstracts.

Structured and unstructured abstracts

Structured abstracts are followed by most journals, are more informative, and include specific subheadings/subsections under which the abstract needs to be composed.[ 1 , 7 , 8 , 9 , 10 , 11 , 13 , 17 , 18 ] These subheadings usually include context/background, objectives, design, setting, participants, interventions, main outcome measures, results, and conclusions.[ 1 ] Some journals stick to the standard IMRAD format for the structure of the abstracts, and the subheadings would include Introduction/Background, Methods, Results, And (instead of Discussion) the Conclusion/s.[ 1 , 2 , 7 , 8 , 9 , 10 , 11 , 12 , 13 , 17 , 18 ] Structured abstracts are more elaborate, informative, easy to read, recall, and peer-review, and hence are preferred; however, they consume more space and can have same limitations as an unstructured abstract.[ 7 , 9 , 18 ] The structured abstracts are (possibly) better understood by the reviewers and readers. Anyway, the choice of the type of the abstract and the subheadings of a structured abstract depend on the particular journal style and is not left to the author's wish.[ 7 , 10 , 12 ] Separate subheadings may be necessary for reporting meta-analysis, educational research, quality improvement work, review, or case study.[ 1 ] Clinical trial abstracts need to include the essential items mentioned in the CONSORT (Consolidated Standards Of Reporting Trials) guidelines.[ 7 , 9 , 14 , 19 ] Similar guidelines exist for various other types of studies, including observational studies and for studies of diagnostic accuracy.[ 20 , 21 ] A useful resource for the above guidelines is available at www.equator-network.org (Enhancing the QUAlity and Transparency Of health Research). Unstructured (or non-structured) abstracts are free-flowing, do not have predefined subheadings, and are commonly used for papers that (usually) do not describe original research.[ 1 , 7 , 9 , 10 ]

The four-point structured abstract: This has the following elements which need to be properly balanced with regard to the content/matter under each subheading:[ 9 ]

Background and/or Objectives: This states why the work was undertaken and is usually written in just a couple of sentences.[ 3 , 7 , 8 , 9 , 10 , 12 , 13 ] The hypothesis/study question and the major objectives are also stated under this subheading.[ 3 , 7 , 8 , 9 , 10 , 12 , 13 ]

Methods: This subsection is the longest, states what was done, and gives essential details of the study design, setting, participants, blinding, sample size, sampling method, intervention/s, duration and follow-up, research instruments, main outcome measures, parameters evaluated, and how the outcomes were assessed or analyzed.[ 3 , 7 , 8 , 9 , 10 , 12 , 13 , 14 , 17 ]

Results/Observations/Findings: This subheading states what was found, is longer, is difficult to draft, and needs to mention important details including the number of study participants, results of analysis (of primary and secondary objectives), and include actual data (numbers, mean, median, standard deviation, “P” values, 95% confidence intervals, effect sizes, relative risks, odds ratio, etc.).[ 3 , 7 , 8 , 9 , 10 , 12 , 13 , 14 , 17 ]

Conclusions: The take-home message (the “so what” of the paper) and other significant/important findings should be stated here, considering the interpretation of the research question/hypothesis and results put together (without overinterpreting the findings) and may also include the author's views on the implications of the study.[ 3 , 7 , 8 , 9 , 10 , 12 , 13 , 14 , 17 ]

The eight-point structured abstract: This has the following eight subheadings – Objectives, Study Design, Study Setting, Participants/Patients, Methods/Intervention, Outcome Measures, Results, and Conclusions.[ 3 , 9 , 18 ] The instructions to authors given by the particular journal state whether they use the four- or eight-point abstract or variants thereof.[ 3 , 14 ]

Descriptive and Informative abstracts

Descriptive abstracts are short (75–150 words), only portray what the paper contains without providing any more details; the reader has to read the full paper to know about its contents and are rarely used for original research papers.[ 7 , 10 ] These are used for case reports, reviews, opinions, and so on.[ 7 , 10 ] Informative abstracts (which may be structured or unstructured as described above) give a complete detailed summary of the article contents and truly reflect the actual research done.[ 7 , 10 ]

Drafting a suitable abstract

It is important to religiously stick to the instructions to authors (format, word limit, font size/style, and subheadings) provided by the journal for which the abstract and the paper are being written.[ 7 , 8 , 9 , 10 , 13 ] Most journals allow 200–300 words for formulating the abstract and it is wise to restrict oneself to this word limit.[ 1 , 2 , 3 , 7 , 8 , 9 , 10 , 11 , 12 , 13 , 22 ] Though some authors prefer to draft the abstract initially, followed by the main text of the paper, it is recommended to draft the abstract in the end to maintain accuracy and conformity with the main text of the paper (thus maintaining an easy linkage/alignment with title, on one hand, and the introduction section of the main text, on the other hand).[ 2 , 7 , 9 , 10 , 11 ] The authors should check the subheadings (of the structured abstract) permitted by the target journal, use phrases rather than sentences to draft the content of the abstract, and avoid passive voice.[ 1 , 7 , 9 , 12 ] Next, the authors need to get rid of redundant words and edit the abstract (extensively) to the correct word count permitted (every word in the abstract “counts”!).[ 7 , 8 , 9 , 10 , 13 ] It is important to ensure that the key message, focus, and novelty of the paper are not compromised; the rationale of the study and the basis of the conclusions are clear; and that the abstract is consistent with the main text of the paper.[ 1 , 2 , 3 , 7 , 9 , 11 , 12 , 13 , 14 , 17 , 22 ] This is especially important while submitting a revision of the paper (modified after addressing the reviewer's comments), as the changes made in the main (revised) text of the paper need to be reflected in the (revised) abstract as well.[ 2 , 10 , 12 , 14 , 22 ] Abbreviations should be avoided in an abstract, unless they are conventionally accepted or standard; references, tables, or figures should not be cited in the abstract.[ 7 , 9 , 10 , 11 , 13 ] It may be worthwhile not to rush with the abstract and to get an opinion by an impartial colleague on the content of the abstract; and if possible, the full paper (an “informal” peer-review).[ 1 , 7 , 8 , 9 , 11 , 17 ] Appropriate “Keywords” (three to ten words or phrases) should follow the abstract and should be preferably chosen from the Medical Subject Headings (MeSH) list of the U.S. National Library of Medicine ( https://meshb.nlm.nih.gov/search ) and are used for indexing purposes.[ 2 , 3 , 11 , 12 ] These keywords need to be different from the words in the main title (the title words are automatically used for indexing the article) and can be variants of the terms/phrases used in the title, or words from the abstract and the main text.[ 3 , 12 ] The ICMJE (International Committee of Medical Journal Editors; http://www.icmje.org/ ) also recommends publishing the clinical trial registration number at the end of the abstract.[ 7 , 14 ]

Checklist for a good abstract

Table 3 gives a checklist/useful tips for formulating a good abstract for a research paper.[ 1 , 2 , 3 , 7 , 8 , 9 , 10 , 11 , 12 , 13 , 14 , 17 , 22 ]

Checklist/useful tips for formulating a good abstract for a research paper

Concluding Remarks

This review article has given a detailed account of the importance and types of titles and abstracts. It has also attempted to give useful hints for drafting an appropriate title and a complete abstract for a research paper. It is hoped that this review will help the authors in their career in medical writing.

Financial support and sponsorship

Conflicts of interest.

There are no conflicts of interest.

Acknowledgement

The author thanks Dr. Hemant Deshmukh - Dean, Seth G.S. Medical College & KEM Hospital, for granting permission to publish this manuscript.

Have a language expert improve your writing

Run a free plagiarism check in 10 minutes, automatically generate references for free.

• Knowledge Base
• Methodology

Research Design | Step-by-Step Guide with Examples

Published on 5 May 2022 by Shona McCombes . Revised on 20 March 2023.

A research design is a strategy for answering your research question  using empirical data. Creating a research design means making decisions about:

• Your overall aims and approach
• The type of research design you’ll use
• Your sampling methods or criteria for selecting subjects
• Your data collection methods
• The procedures you’ll follow to collect data
• Your data analysis methods

A well-planned research design helps ensure that your methods match your research aims and that you use the right kind of analysis for your data.

Table of contents

Step 1: consider your aims and approach, step 2: choose a type of research design, step 3: identify your population and sampling method, step 4: choose your data collection methods, step 5: plan your data collection procedures, step 6: decide on your data analysis strategies, frequently asked questions.

• Introduction

Before you can start designing your research, you should already have a clear idea of the research question you want to investigate.

There are many different ways you could go about answering this question. Your research design choices should be driven by your aims and priorities – start by thinking carefully about what you want to achieve.

The first choice you need to make is whether you’ll take a qualitative or quantitative approach.

Qualitative research designs tend to be more flexible and inductive , allowing you to adjust your approach based on what you find throughout the research process.

Quantitative research designs tend to be more fixed and deductive , with variables and hypotheses clearly defined in advance of data collection.

It’s also possible to use a mixed methods design that integrates aspects of both approaches. By combining qualitative and quantitative insights, you can gain a more complete picture of the problem you’re studying and strengthen the credibility of your conclusions.

Practical and ethical considerations when designing research

As well as scientific considerations, you need to think practically when designing your research. If your research involves people or animals, you also need to consider research ethics .

• How much time do you have to collect data and write up the research?
• Will you be able to gain access to the data you need (e.g., by travelling to a specific location or contacting specific people)?
• Do you have the necessary research skills (e.g., statistical analysis or interview techniques)?
• Will you need ethical approval ?

At each stage of the research design process, make sure that your choices are practically feasible.

Prevent plagiarism, run a free check.

Within both qualitative and quantitative approaches, there are several types of research design to choose from. Each type provides a framework for the overall shape of your research.

Types of quantitative research designs

Quantitative designs can be split into four main types. Experimental and   quasi-experimental designs allow you to test cause-and-effect relationships, while descriptive and correlational designs allow you to measure variables and describe relationships between them.

With descriptive and correlational designs, you can get a clear picture of characteristics, trends, and relationships as they exist in the real world. However, you can’t draw conclusions about cause and effect (because correlation doesn’t imply causation ).

Experiments are the strongest way to test cause-and-effect relationships without the risk of other variables influencing the results. However, their controlled conditions may not always reflect how things work in the real world. They’re often also more difficult and expensive to implement.

Types of qualitative research designs

Qualitative designs are less strictly defined. This approach is about gaining a rich, detailed understanding of a specific context or phenomenon, and you can often be more creative and flexible in designing your research.

The table below shows some common types of qualitative design. They often have similar approaches in terms of data collection, but focus on different aspects when analysing the data.

Your research design should clearly define who or what your research will focus on, and how you’ll go about choosing your participants or subjects.

In research, a population is the entire group that you want to draw conclusions about, while a sample is the smaller group of individuals you’ll actually collect data from.

Defining the population

A population can be made up of anything you want to study – plants, animals, organisations, texts, countries, etc. In the social sciences, it most often refers to a group of people.

For example, will you focus on people from a specific demographic, region, or background? Are you interested in people with a certain job or medical condition, or users of a particular product?

The more precisely you define your population, the easier it will be to gather a representative sample.

Sampling methods

Even with a narrowly defined population, it’s rarely possible to collect data from every individual. Instead, you’ll collect data from a sample.

To select a sample, there are two main approaches: probability sampling and non-probability sampling . The sampling method you use affects how confidently you can generalise your results to the population as a whole.

Probability sampling is the most statistically valid option, but it’s often difficult to achieve unless you’re dealing with a very small and accessible population.

For practical reasons, many studies use non-probability sampling, but it’s important to be aware of the limitations and carefully consider potential biases. You should always make an effort to gather a sample that’s as representative as possible of the population.

Case selection in qualitative research

In some types of qualitative designs, sampling may not be relevant.

For example, in an ethnography or a case study, your aim is to deeply understand a specific context, not to generalise to a population. Instead of sampling, you may simply aim to collect as much data as possible about the context you are studying.

In these types of design, you still have to carefully consider your choice of case or community. You should have a clear rationale for why this particular case is suitable for answering your research question.

For example, you might choose a case study that reveals an unusual or neglected aspect of your research problem, or you might choose several very similar or very different cases in order to compare them.

Data collection methods are ways of directly measuring variables and gathering information. They allow you to gain first-hand knowledge and original insights into your research problem.

You can choose just one data collection method, or use several methods in the same study.

Survey methods

Surveys allow you to collect data about opinions, behaviours, experiences, and characteristics by asking people directly. There are two main survey methods to choose from: questionnaires and interviews.

Observation methods

Observations allow you to collect data unobtrusively, observing characteristics, behaviours, or social interactions without relying on self-reporting.

Observations may be conducted in real time, taking notes as you observe, or you might make audiovisual recordings for later analysis. They can be qualitative or quantitative.

Other methods of data collection

There are many other ways you might collect data depending on your field and topic.

If you’re not sure which methods will work best for your research design, try reading some papers in your field to see what data collection methods they used.

Secondary data

If you don’t have the time or resources to collect data from the population you’re interested in, you can also choose to use secondary data that other researchers already collected – for example, datasets from government surveys or previous studies on your topic.

With this raw data, you can do your own analysis to answer new research questions that weren’t addressed by the original study.

Using secondary data can expand the scope of your research, as you may be able to access much larger and more varied samples than you could collect yourself.

However, it also means you don’t have any control over which variables to measure or how to measure them, so the conclusions you can draw may be limited.

As well as deciding on your methods, you need to plan exactly how you’ll use these methods to collect data that’s consistent, accurate, and unbiased.

Planning systematic procedures is especially important in quantitative research, where you need to precisely define your variables and ensure your measurements are reliable and valid.

Operationalisation

Some variables, like height or age, are easily measured. But often you’ll be dealing with more abstract concepts, like satisfaction, anxiety, or competence. Operationalisation means turning these fuzzy ideas into measurable indicators.

If you’re using observations , which events or actions will you count?

If you’re using surveys , which questions will you ask and what range of responses will be offered?

You may also choose to use or adapt existing materials designed to measure the concept you’re interested in – for example, questionnaires or inventories whose reliability and validity has already been established.

Reliability and validity

Reliability means your results can be consistently reproduced , while validity means that you’re actually measuring the concept you’re interested in.

For valid and reliable results, your measurement materials should be thoroughly researched and carefully designed. Plan your procedures to make sure you carry out the same steps in the same way for each participant.

If you’re developing a new questionnaire or other instrument to measure a specific concept, running a pilot study allows you to check its validity and reliability in advance.

Sampling procedures

As well as choosing an appropriate sampling method, you need a concrete plan for how you’ll actually contact and recruit your selected sample.

That means making decisions about things like:

• How many participants do you need for an adequate sample size?
• What inclusion and exclusion criteria will you use to identify eligible participants?
• How will you contact your sample – by mail, online, by phone, or in person?

If you’re using a probability sampling method, it’s important that everyone who is randomly selected actually participates in the study. How will you ensure a high response rate?

If you’re using a non-probability method, how will you avoid bias and ensure a representative sample?

Data management

It’s also important to create a data management plan for organising and storing your data.

Will you need to transcribe interviews or perform data entry for observations? You should anonymise and safeguard any sensitive data, and make sure it’s backed up regularly.

Keeping your data well organised will save time when it comes to analysing them. It can also help other researchers validate and add to your findings.

On their own, raw data can’t answer your research question. The last step of designing your research is planning how you’ll analyse the data.

Quantitative data analysis

In quantitative research, you’ll most likely use some form of statistical analysis . With statistics, you can summarise your sample data, make estimates, and test hypotheses.

Using descriptive statistics , you can summarise your sample data in terms of:

• The distribution of the data (e.g., the frequency of each score on a test)
• The central tendency of the data (e.g., the mean to describe the average score)
• The variability of the data (e.g., the standard deviation to describe how spread out the scores are)

The specific calculations you can do depend on the level of measurement of your variables.

Using inferential statistics , you can:

• Make estimates about the population based on your sample data.
• Test hypotheses about a relationship between variables.

Regression and correlation tests look for associations between two or more variables, while comparison tests (such as t tests and ANOVAs ) look for differences in the outcomes of different groups.

Your choice of statistical test depends on various aspects of your research design, including the types of variables you’re dealing with and the distribution of your data.

Qualitative data analysis

In qualitative research, your data will usually be very dense with information and ideas. Instead of summing it up in numbers, you’ll need to comb through the data in detail, interpret its meanings, identify patterns, and extract the parts that are most relevant to your research question.

Two of the most common approaches to doing this are thematic analysis and discourse analysis .

There are many other ways of analysing qualitative data depending on the aims of your research. To get a sense of potential approaches, try reading some qualitative research papers in your field.

A sample is a subset of individuals from a larger population. Sampling means selecting the group that you will actually collect data from in your research.

For example, if you are researching the opinions of students in your university, you could survey a sample of 100 students.

Statistical sampling allows you to test a hypothesis about the characteristics of a population. There are various sampling methods you can use to ensure that your sample is representative of the population as a whole.

Operationalisation means turning abstract conceptual ideas into measurable observations.

For example, the concept of social anxiety isn’t directly observable, but it can be operationally defined in terms of self-rating scores, behavioural avoidance of crowded places, or physical anxiety symptoms in social situations.

Before collecting data , it’s important to consider how you will operationalise the variables that you want to measure.

The research methods you use depend on the type of data you need to answer your research question .

• If you want to measure something or test a hypothesis , use quantitative methods . If you want to explore ideas, thoughts, and meanings, use qualitative methods .
• If you want to analyse a large amount of readily available data, use secondary data. If you want data specific to your purposes with control over how they are generated, collect primary data.
• If you want to establish cause-and-effect relationships between variables , use experimental methods. If you want to understand the characteristics of a research subject, use descriptive methods.

Cite this Scribbr article

If you want to cite this source, you can copy and paste the citation or click the ‘Cite this Scribbr article’ button to automatically add the citation to our free Reference Generator.

McCombes, S. (2023, March 20). Research Design | Step-by-Step Guide with Examples. Scribbr. Retrieved 3 September 2024, from https://www.scribbr.co.uk/research-methods/research-design/

Is this article helpful?

Shona McCombes

Research Design 101

Everything You Need To Get Started (With Examples)

By: Derek Jansen (MBA) | Reviewers: Eunice Rautenbach (DTech) & Kerryn Warren (PhD) | April 2023

Navigating the world of research can be daunting, especially if you’re a first-time researcher. One concept you’re bound to run into fairly early in your research journey is that of “ research design ”. Here, we’ll guide you through the basics using practical examples , so that you can approach your research with confidence.

Overview: Research Design 101

What is research design.

• Research design types for quantitative studies
• Video explainer : quantitative research design
• Research design types for qualitative studies
• Video explainer : qualitative research design
• How to choose a research design
• Key takeaways

Research design refers to the overall plan, structure or strategy that guides a research project , from its conception to the final data analysis. A good research design serves as the blueprint for how you, as the researcher, will collect and analyse data while ensuring consistency, reliability and validity throughout your study.

Understanding different types of research designs is essential as helps ensure that your approach is suitable  given your research aims, objectives and questions , as well as the resources you have available to you. Without a clear big-picture view of how you’ll design your research, you run the risk of potentially making misaligned choices in terms of your methodology – especially your sampling , data collection and data analysis decisions.

The problem with defining research design…

One of the reasons students struggle with a clear definition of research design is because the term is used very loosely across the internet, and even within academia.

Some sources claim that the three research design types are qualitative, quantitative and mixed methods , which isn’t quite accurate (these just refer to the type of data that you’ll collect and analyse). Other sources state that research design refers to the sum of all your design choices, suggesting it’s more like a research methodology . Others run off on other less common tangents. No wonder there’s confusion!

In this article, we’ll clear up the confusion. We’ll explain the most common research design types for both qualitative and quantitative research projects, whether that is for a full dissertation or thesis, or a smaller research paper or article.

Research Design: Quantitative Studies

Quantitative research involves collecting and analysing data in a numerical form. Broadly speaking, there are four types of quantitative research designs: descriptive , correlational , experimental , and quasi-experimental . 

Descriptive Research Design

As the name suggests, descriptive research design focuses on describing existing conditions, behaviours, or characteristics by systematically gathering information without manipulating any variables. In other words, there is no intervention on the researcher’s part – only data collection.

For example, if you’re studying smartphone addiction among adolescents in your community, you could deploy a survey to a sample of teens asking them to rate their agreement with certain statements that relate to smartphone addiction. The collected data would then provide insight regarding how widespread the issue may be – in other words, it would describe the situation.

The key defining attribute of this type of research design is that it purely describes the situation . In other words, descriptive research design does not explore potential relationships between different variables or the causes that may underlie those relationships. Therefore, descriptive research is useful for generating insight into a research problem by describing its characteristics . By doing so, it can provide valuable insights and is often used as a precursor to other research design types.

Correlational Research Design

Correlational design is a popular choice for researchers aiming to identify and measure the relationship between two or more variables without manipulating them . In other words, this type of research design is useful when you want to know whether a change in one thing tends to be accompanied by a change in another thing.

For example, if you wanted to explore the relationship between exercise frequency and overall health, you could use a correlational design to help you achieve this. In this case, you might gather data on participants’ exercise habits, as well as records of their health indicators like blood pressure, heart rate, or body mass index. Thereafter, you’d use a statistical test to assess whether there’s a relationship between the two variables (exercise frequency and health).

As you can see, correlational research design is useful when you want to explore potential relationships between variables that cannot be manipulated or controlled for ethical, practical, or logistical reasons. It is particularly helpful in terms of developing predictions , and given that it doesn’t involve the manipulation of variables, it can be implemented at a large scale more easily than experimental designs (which will look at next).

That said, it’s important to keep in mind that correlational research design has limitations – most notably that it cannot be used to establish causality . In other words, correlation does not equal causation . To establish causality, you’ll need to move into the realm of experimental design, coming up next…

Need a helping hand?

Experimental Research Design

Experimental research design is used to determine if there is a causal relationship between two or more variables . With this type of research design, you, as the researcher, manipulate one variable (the independent variable) while controlling others (dependent variables). Doing so allows you to observe the effect of the former on the latter and draw conclusions about potential causality.

For example, if you wanted to measure if/how different types of fertiliser affect plant growth, you could set up several groups of plants, with each group receiving a different type of fertiliser, as well as one with no fertiliser at all. You could then measure how much each plant group grew (on average) over time and compare the results from the different groups to see which fertiliser was most effective.

Overall, experimental research design provides researchers with a powerful way to identify and measure causal relationships (and the direction of causality) between variables. However, developing a rigorous experimental design can be challenging as it’s not always easy to control all the variables in a study. This often results in smaller sample sizes , which can reduce the statistical power and generalisability of the results.

Moreover, experimental research design requires random assignment . This means that the researcher needs to assign participants to different groups or conditions in a way that each participant has an equal chance of being assigned to any group (note that this is not the same as random sampling ). Doing so helps reduce the potential for bias and confounding variables . This need for random assignment can lead to ethics-related issues . For example, withholding a potentially beneficial medical treatment from a control group may be considered unethical in certain situations.

Quasi-Experimental Research Design

Quasi-experimental research design is used when the research aims involve identifying causal relations , but one cannot (or doesn’t want to) randomly assign participants to different groups (for practical or ethical reasons). Instead, with a quasi-experimental research design, the researcher relies on existing groups or pre-existing conditions to form groups for comparison.

For example, if you were studying the effects of a new teaching method on student achievement in a particular school district, you may be unable to randomly assign students to either group and instead have to choose classes or schools that already use different teaching methods. This way, you still achieve separate groups, without having to assign participants to specific groups yourself.

Naturally, quasi-experimental research designs have limitations when compared to experimental designs. Given that participant assignment is not random, it’s more difficult to confidently establish causality between variables, and, as a researcher, you have less control over other variables that may impact findings.

All that said, quasi-experimental designs can still be valuable in research contexts where random assignment is not possible and can often be undertaken on a much larger scale than experimental research, thus increasing the statistical power of the results. What’s important is that you, as the researcher, understand the limitations of the design and conduct your quasi-experiment as rigorously as possible, paying careful attention to any potential confounding variables .

Research Design: Qualitative Studies

There are many different research design types when it comes to qualitative studies, but here we’ll narrow our focus to explore the “Big 4”. Specifically, we’ll look at phenomenological design, grounded theory design, ethnographic design, and case study design.

Phenomenological Research Design

Phenomenological design involves exploring the meaning of lived experiences and how they are perceived by individuals. This type of research design seeks to understand people’s perspectives , emotions, and behaviours in specific situations. Here, the aim for researchers is to uncover the essence of human experience without making any assumptions or imposing preconceived ideas on their subjects.

For example, you could adopt a phenomenological design to study why cancer survivors have such varied perceptions of their lives after overcoming their disease. This could be achieved by interviewing survivors and then analysing the data using a qualitative analysis method such as thematic analysis to identify commonalities and differences.

Phenomenological research design typically involves in-depth interviews or open-ended questionnaires to collect rich, detailed data about participants’ subjective experiences. This richness is one of the key strengths of phenomenological research design but, naturally, it also has limitations. These include potential biases in data collection and interpretation and the lack of generalisability of findings to broader populations.

Grounded Theory Research Design

Grounded theory (also referred to as “GT”) aims to develop theories by continuously and iteratively analysing and comparing data collected from a relatively large number of participants in a study. It takes an inductive (bottom-up) approach, with a focus on letting the data “speak for itself”, without being influenced by preexisting theories or the researcher’s preconceptions.

As an example, let’s assume your research aims involved understanding how people cope with chronic pain from a specific medical condition, with a view to developing a theory around this. In this case, grounded theory design would allow you to explore this concept thoroughly without preconceptions about what coping mechanisms might exist. You may find that some patients prefer cognitive-behavioural therapy (CBT) while others prefer to rely on herbal remedies. Based on multiple, iterative rounds of analysis, you could then develop a theory in this regard, derived directly from the data (as opposed to other preexisting theories and models).

Grounded theory typically involves collecting data through interviews or observations and then analysing it to identify patterns and themes that emerge from the data. These emerging ideas are then validated by collecting more data until a saturation point is reached (i.e., no new information can be squeezed from the data). From that base, a theory can then be developed .

As you can see, grounded theory is ideally suited to studies where the research aims involve theory generation , especially in under-researched areas. Keep in mind though that this type of research design can be quite time-intensive , given the need for multiple rounds of data collection and analysis.

Ethnographic Research Design

Ethnographic design involves observing and studying a culture-sharing group of people in their natural setting to gain insight into their behaviours, beliefs, and values. The focus here is on observing participants in their natural environment (as opposed to a controlled environment). This typically involves the researcher spending an extended period of time with the participants in their environment, carefully observing and taking field notes .

All of this is not to say that ethnographic research design relies purely on observation. On the contrary, this design typically also involves in-depth interviews to explore participants’ views, beliefs, etc. However, unobtrusive observation is a core component of the ethnographic approach.

As an example, an ethnographer may study how different communities celebrate traditional festivals or how individuals from different generations interact with technology differently. This may involve a lengthy period of observation, combined with in-depth interviews to further explore specific areas of interest that emerge as a result of the observations that the researcher has made.

As you can probably imagine, ethnographic research design has the ability to provide rich, contextually embedded insights into the socio-cultural dynamics of human behaviour within a natural, uncontrived setting. Naturally, however, it does come with its own set of challenges, including researcher bias (since the researcher can become quite immersed in the group), participant confidentiality and, predictably, ethical complexities . All of these need to be carefully managed if you choose to adopt this type of research design.

Case Study Design

With case study research design, you, as the researcher, investigate a single individual (or a single group of individuals) to gain an in-depth understanding of their experiences, behaviours or outcomes. Unlike other research designs that are aimed at larger sample sizes, case studies offer a deep dive into the specific circumstances surrounding a person, group of people, event or phenomenon, generally within a bounded setting or context .

As an example, a case study design could be used to explore the factors influencing the success of a specific small business. This would involve diving deeply into the organisation to explore and understand what makes it tick – from marketing to HR to finance. In terms of data collection, this could include interviews with staff and management, review of policy documents and financial statements, surveying customers, etc.

While the above example is focused squarely on one organisation, it’s worth noting that case study research designs can have different variation s, including single-case, multiple-case and longitudinal designs. As you can see in the example, a single-case design involves intensely examining a single entity to understand its unique characteristics and complexities. Conversely, in a multiple-case design , multiple cases are compared and contrasted to identify patterns and commonalities. Lastly, in a longitudinal case design , a single case or multiple cases are studied over an extended period of time to understand how factors develop over time.

As you can see, a case study research design is particularly useful where a deep and contextualised understanding of a specific phenomenon or issue is desired. However, this strength is also its weakness. In other words, you can’t generalise the findings from a case study to the broader population. So, keep this in mind if you’re considering going the case study route.

How To Choose A Research Design

Having worked through all of these potential research designs, you’d be forgiven for feeling a little overwhelmed and wondering, “ But how do I decide which research design to use? ”. While we could write an entire post covering that alone, here are a few factors to consider that will help you choose a suitable research design for your study.

Data type: The first determining factor is naturally the type of data you plan to be collecting – i.e., qualitative or quantitative. This may sound obvious, but we have to be clear about this – don’t try to use a quantitative research design on qualitative data (or vice versa)!

Research aim(s) and question(s): As with all methodological decisions, your research aim and research questions will heavily influence your research design. For example, if your research aims involve developing a theory from qualitative data, grounded theory would be a strong option. Similarly, if your research aims involve identifying and measuring relationships between variables, one of the experimental designs would likely be a better option.

Time: It’s essential that you consider any time constraints you have, as this will impact the type of research design you can choose. For example, if you’ve only got a month to complete your project, a lengthy design such as ethnography wouldn’t be a good fit.

Resources: Take into account the resources realistically available to you, as these need to factor into your research design choice. For example, if you require highly specialised lab equipment to execute an experimental design, you need to be sure that you’ll have access to that before you make a decision.

Keep in mind that when it comes to research, it’s important to manage your risks and play as conservatively as possible. If your entire project relies on you achieving a huge sample, having access to niche equipment or holding interviews with very difficult-to-reach participants, you’re creating risks that could kill your project. So, be sure to think through your choices carefully and make sure that you have backup plans for any existential risks. Remember that a relatively simple methodology executed well generally will typically earn better marks than a highly-complex methodology executed poorly.

Recap: Key Takeaways

We’ve covered a lot of ground here. Let’s recap by looking at the key takeaways:

• Research design refers to the overall plan, structure or strategy that guides a research project, from its conception to the final analysis of data.
• Research designs for quantitative studies include descriptive , correlational , experimental and quasi-experimenta l designs.
• Research designs for qualitative studies include phenomenological , grounded theory , ethnographic and case study designs.
• When choosing a research design, you need to consider a variety of factors, including the type of data you’ll be working with, your research aims and questions, your time and the resources available to you.

If you need a helping hand with your research design (or any other aspect of your research), check out our private coaching services .

Psst... there’s more!

This post was based on one of our popular Research Bootcamps . If you're working on a research project, you'll definitely want to check this out ...

14 Comments

Is there any blog article explaining more on Case study research design? Is there a Case study write-up template? Thank you.

Thanks this was quite valuable to clarify such an important concept.

Thanks for this simplified explanations. it is quite very helpful.

This was really helpful. thanks

Thank you for your explanation. I think case study research design and the use of secondary data in researches needs to be talked about more in your videos and articles because there a lot of case studies research design tailored projects out there.

Please is there any template for a case study research design whose data type is a secondary data on your repository?

This post is very clear, comprehensive and has been very helpful to me. It has cleared the confusion I had in regard to research design and methodology.

This post is helpful, easy to understand, and deconstructs what a research design is. Thanks

This post is really helpful.

how to cite this page

Thank you very much for the post. It is wonderful and has cleared many worries in my mind regarding research designs. I really appreciate .

how can I put this blog as my reference(APA style) in bibliography part?

This post has been very useful to me. Confusing areas have been cleared

This is very helpful and very useful!

Wow! This post has an awful explanation. Appreciated.

Submit a Comment Cancel reply

Your email address will not be published. Required fields are marked *

Save my name, email, and website in this browser for the next time I comment.

• Print Friendly