experimental is design

• Privacy Policy

Home » Experimental Design – Types, Methods, Guide

Experimental Design – Types, Methods, Guide

Table of Contents

Experimental design is a structured approach used to conduct scientific experiments. It enables researchers to explore cause-and-effect relationships by controlling variables and testing hypotheses. This guide explores the types of experimental designs, common methods, and best practices for planning and conducting experiments.

Experimental Design

Experimental design refers to the process of planning a study to test a hypothesis, where variables are manipulated to observe their effects on outcomes. By carefully controlling conditions, researchers can determine whether specific factors cause changes in a dependent variable.

Key Characteristics of Experimental Design :

• Manipulation of Variables : The researcher intentionally changes one or more independent variables.
• Control of Extraneous Factors : Other variables are kept constant to avoid interference.
• Randomization : Subjects are often randomly assigned to groups to reduce bias.
• Replication : Repeating the experiment or having multiple subjects helps verify results.

Purpose of Experimental Design

The primary purpose of experimental design is to establish causal relationships by controlling for extraneous factors and reducing bias. Experimental designs help:

• Test Hypotheses : Determine if there is a significant effect of independent variables on dependent variables.
• Control Confounding Variables : Minimize the impact of variables that could distort results.
• Generate Reproducible Results : Provide a structured approach that allows other researchers to replicate findings.

Types of Experimental Designs

Experimental designs can vary based on the number of variables, the assignment of participants, and the purpose of the experiment. Here are some common types:

1. Pre-Experimental Designs

These designs are exploratory and lack random assignment, often used when strict control is not feasible. They provide initial insights but are less rigorous in establishing causality.

• Example : A training program is provided, and participants’ knowledge is tested afterward, without a pretest.
• Example : A group is tested on reading skills, receives instruction, and is tested again to measure improvement.

2. True Experimental Designs

True experiments involve random assignment of participants to control or experimental groups, providing high levels of control over variables.

• Example : A new drug’s efficacy is tested with patients randomly assigned to receive the drug or a placebo.
• Example : Two groups are observed after one group receives a treatment, and the other receives no intervention.

3. Quasi-Experimental Designs

Quasi-experiments lack random assignment but still aim to determine causality by comparing groups or time periods. They are often used when randomization isn’t possible, such as in natural or field experiments.

• Example : Schools receive different curriculums, and students’ test scores are compared before and after implementation.
• Example : Traffic accident rates are recorded for a city before and after a new speed limit is enforced.

4. Factorial Designs

Factorial designs test the effects of multiple independent variables simultaneously. This design is useful for studying the interactions between variables.

• Example : Studying how caffeine (variable 1) and sleep deprivation (variable 2) affect memory performance.
• Example : An experiment studying the impact of age, gender, and education level on technology usage.

5. Repeated Measures Design

In repeated measures designs, the same participants are exposed to different conditions or treatments. This design is valuable for studying changes within subjects over time.

• Example : Measuring reaction time in participants before, during, and after caffeine consumption.
• Example : Testing two medications, with each participant receiving both but in a different sequence.

Methods for Implementing Experimental Designs

• Purpose : Ensures each participant has an equal chance of being assigned to any group, reducing selection bias.
• Method : Use random number generators or assignment software to allocate participants randomly.
• Purpose : Prevents participants or researchers from knowing which group (experimental or control) participants belong to, reducing bias.
• Method : Implement single-blind (participants unaware) or double-blind (both participants and researchers unaware) procedures.
• Purpose : Provides a baseline for comparison, showing what would happen without the intervention.
• Method : Include a group that does not receive the treatment but otherwise undergoes the same conditions.
• Purpose : Controls for order effects in repeated measures designs by varying the order of treatments.
• Method : Assign different sequences to participants, ensuring that each condition appears equally across orders.
• Purpose : Ensures reliability by repeating the experiment or including multiple participants within groups.
• Method : Increase sample size or repeat studies with different samples or in different settings.

Steps to Conduct an Experimental Design

• Clearly state what you intend to discover or prove through the experiment. A strong hypothesis guides the experiment’s design and variable selection.
• Independent Variable (IV) : The factor manipulated by the researcher (e.g., amount of sleep).
• Dependent Variable (DV) : The outcome measured (e.g., reaction time).
• Control Variables : Factors kept constant to prevent interference with results (e.g., time of day for testing).
• Choose a design type that aligns with your research question, hypothesis, and available resources. For example, an RCT for a medical study or a factorial design for complex interactions.
• Randomly assign participants to experimental or control groups. Ensure control groups are similar to experimental groups in all respects except for the treatment received.
• Randomize the assignment and, if possible, apply blinding to minimize potential bias.
• Follow a consistent procedure for each group, collecting data systematically. Record observations and manage any unexpected events or variables that may arise.
• Use appropriate statistical methods to test for significant differences between groups, such as t-tests, ANOVA, or regression analysis.
• Determine whether the results support your hypothesis and analyze any trends, patterns, or unexpected findings. Discuss possible limitations and implications of your results.

Examples of Experimental Design in Research

• Medicine : Testing a new drug’s effectiveness through a randomized controlled trial, where one group receives the drug and another receives a placebo.
• Psychology : Studying the effect of sleep deprivation on memory using a within-subject design, where participants are tested with different sleep conditions.
• Education : Comparing teaching methods in a quasi-experimental design by measuring students’ performance before and after implementing a new curriculum.
• Marketing : Using a factorial design to examine the effects of advertisement type and frequency on consumer purchase behavior.
• Environmental Science : Testing the impact of a pollution reduction policy through a time series design, recording pollution levels before and after implementation.

Experimental design is fundamental to conducting rigorous and reliable research, offering a systematic approach to exploring causal relationships. With various types of designs and methods, researchers can choose the most appropriate setup to answer their research questions effectively. By applying best practices, controlling variables, and selecting suitable statistical methods, experimental design supports meaningful insights across scientific, medical, and social research fields.

• Campbell, D. T., & Stanley, J. C. (1963). Experimental and Quasi-Experimental Designs for Research . Houghton Mifflin Company.
• Shadish, W. R., Cook, T. D., & Campbell, D. T. (2002). Experimental and Quasi-Experimental Designs for Generalized Causal Inference . Houghton Mifflin.
• Fisher, R. A. (1935). The Design of Experiments . Oliver and Boyd.
• Field, A. (2013). Discovering Statistics Using IBM SPSS Statistics . Sage Publications.
• Cohen, J. (1988). Statistical Power Analysis for the Behavioral Sciences . Routledge.

About the author

Muhammad Hassan

Researcher, Academic Writer, Web developer

You may also like

Ethnographic Research -Types, Methods and Guide

One-to-One Interview – Methods and Guide

Basic Research – Types, Methods and Examples

Qualitative Research Methods

Quasi-Experimental Research Design – Types...

Quantitative Research – Methods, Types and...

Experimental Design: Types, Examples & Methods

Saul McLeod, PhD

Editor-in-Chief for Simply Psychology

BSc (Hons) Psychology, MRes, PhD, University of Manchester

Saul McLeod, PhD., is a qualified psychology teacher with over 18 years of experience in further and higher education. He has been published in peer-reviewed journals, including the Journal of Clinical Psychology.

Learn about our Editorial Process

Olivia Guy-Evans, MSc

Associate Editor for Simply Psychology

BSc (Hons) Psychology, MSc Psychology of Education

Olivia Guy-Evans is a writer and associate editor for Simply Psychology. She has previously worked in healthcare and educational sectors.

On This Page:

Experimental design refers to how participants are allocated to different groups in an experiment. Types of design include repeated measures, independent groups, and matched pairs designs.

Probably the most common way to design an experiment in psychology is to divide the participants into two groups, the experimental group and the control group, and then introduce a change to the experimental group, not the control group.

The researcher must decide how he/she will allocate their sample to the different experimental groups.  For example, if there are 10 participants, will all 10 participants participate in both groups (e.g., repeated measures), or will the participants be split in half and take part in only one group each?

Three types of experimental designs are commonly used:

1. Independent Measures

Independent measures design, also known as between-groups , is an experimental design where different participants are used in each condition of the independent variable.  This means that each condition of the experiment includes a different group of participants.

This should be done by random allocation, ensuring that each participant has an equal chance of being assigned to one group.

Independent measures involve using two separate groups of participants, one in each condition. For example:

• Con : More people are needed than with the repeated measures design (i.e., more time-consuming).
• Pro : Avoids order effects (such as practice or fatigue) as people participate in one condition only.  If a person is involved in several conditions, they may become bored, tired, and fed up by the time they come to the second condition or become wise to the requirements of the experiment!
• Con : Differences between participants in the groups may affect results, for example, variations in age, gender, or social background.  These differences are known as participant variables (i.e., a type of extraneous variable ).
• Control : After the participants have been recruited, they should be randomly assigned to their groups. This should ensure the groups are similar, on average (reducing participant variables).

2. Repeated Measures Design

Repeated Measures design is an experimental design where the same participants participate in each independent variable condition.  This means that each experiment condition includes the same group of participants.

Repeated Measures design is also known as within-groups or within-subjects design .

• Pro : As the same participants are used in each condition, participant variables (i.e., individual differences) are reduced.
• Con : There may be order effects. Order effects refer to the order of the conditions affecting the participants’ behavior.  Performance in the second condition may be better because the participants know what to do (i.e., practice effect).  Or their performance might be worse in the second condition because they are tired (i.e., fatigue effect). This limitation can be controlled using counterbalancing.
• Pro : Fewer people are needed as they participate in all conditions (i.e., saves time).
• Control : To combat order effects, the researcher counter-balances the order of the conditions for the participants.  Alternating the order in which participants perform in different conditions of an experiment.

Counterbalancing

Suppose we used a repeated measures design in which all of the participants first learned words in “loud noise” and then learned them in “no noise.”

We expect the participants to learn better in “no noise” because of order effects, such as practice. However, a researcher can control for order effects using counterbalancing.

The sample would be split into two groups: experimental (A) and control (B).  For example, group 1 does ‘A’ then ‘B,’ and group 2 does ‘B’ then ‘A.’ This is to eliminate order effects.

Although order effects occur for each participant, they balance each other out in the results because they occur equally in both groups.

3. Matched Pairs Design

A matched pairs design is an experimental design where pairs of participants are matched in terms of key variables, such as age or socioeconomic status. One member of each pair is then placed into the experimental group and the other member into the control group .

One member of each matched pair must be randomly assigned to the experimental group and the other to the control group.

• Con : If one participant drops out, you lose 2 PPs’ data.
• Pro : Reduces participant variables because the researcher has tried to pair up the participants so that each condition has people with similar abilities and characteristics.
• Con : Very time-consuming trying to find closely matched pairs.
• Pro : It avoids order effects, so counterbalancing is not necessary.
• Con : Impossible to match people exactly unless they are identical twins!
• Control : Members of each pair should be randomly assigned to conditions. However, this does not solve all these problems.

Experimental design refers to how participants are allocated to an experiment’s different conditions (or IV levels). There are three types:

1. Independent measures / between-groups : Different participants are used in each condition of the independent variable.

2. Repeated measures /within groups : The same participants take part in each condition of the independent variable.

3. Matched pairs : Each condition uses different participants, but they are matched in terms of important characteristics, e.g., gender, age, intelligence, etc.

Learning Check

Read about each of the experiments below. For each experiment, identify (1) which experimental design was used; and (2) why the researcher might have used that design.

1 . To compare the effectiveness of two different types of therapy for depression, depressed patients were assigned to receive either cognitive therapy or behavior therapy for a 12-week period.

The researchers attempted to ensure that the patients in the two groups had similar severity of depressed symptoms by administering a standardized test of depression to each participant, then pairing them according to the severity of their symptoms.

2 . To assess the difference in reading comprehension between 7 and 9-year-olds, a researcher recruited each group from a local primary school. They were given the same passage of text to read and then asked a series of questions to assess their understanding.

3 . To assess the effectiveness of two different ways of teaching reading, a group of 5-year-olds was recruited from a primary school. Their level of reading ability was assessed, and then they were taught using scheme one for 20 weeks.

At the end of this period, their reading was reassessed, and a reading improvement score was calculated. They were then taught using scheme two for a further 20 weeks, and another reading improvement score for this period was calculated. The reading improvement scores for each child were then compared.

4 . To assess the effect of the organization on recall, a researcher randomly assigned student volunteers to two conditions.

Condition one attempted to recall a list of words that were organized into meaningful categories; condition two attempted to recall the same words, randomly grouped on the page.

Experiment Terminology

Ecological validity.

The degree to which an investigation represents real-life experiences.

Experimenter effects

These are the ways that the experimenter can accidentally influence the participant through their appearance or behavior.

Demand characteristics

The clues in an experiment lead the participants to think they know what the researcher is looking for (e.g., the experimenter’s body language).

Independent variable (IV)

The variable the experimenter manipulates (i.e., changes) is assumed to have a direct effect on the dependent variable.

Dependent variable (DV)

Variable the experimenter measures. This is the outcome (i.e., the result) of a study.

Extraneous variables (EV)

All variables which are not independent variables but could affect the results (DV) of the experiment. Extraneous variables should be controlled where possible.

Confounding variables

Variable(s) that have affected the results (DV), apart from the IV. A confounding variable could be an extraneous variable that has not been controlled.

Random Allocation

Randomly allocating participants to independent variable conditions means that all participants should have an equal chance of taking part in each condition.

The principle of random allocation is to avoid bias in how the experiment is carried out and limit the effects of participant variables.

Order effects

Changes in participants’ performance due to their repeating the same or similar test more than once. Examples of order effects include:

(i) practice effect: an improvement in performance on a task due to repetition, for example, because of familiarity with the task;

(ii) fatigue effect: a decrease in performance of a task due to repetition, for example, because of boredom or tiredness.

Have a language expert improve your writing

Run a free plagiarism check in 10 minutes, automatically generate references for free.

• Knowledge Base
• Methodology
• A Quick Guide to Experimental Design | 5 Steps & Examples

A Quick Guide to Experimental Design | 5 Steps & Examples

Published on 11 April 2022 by Rebecca Bevans . Revised on 5 December 2022.

Experiments are used to study causal relationships . You manipulate one or more independent variables and measure their effect on one or more dependent variables.

Experimental design means creating a set of procedures to systematically test a hypothesis . A good experimental design requires a strong understanding of the system you are studying. 

There are five key steps in designing an experiment:

• Consider your variables and how they are related
• Write a specific, testable hypothesis
• Design experimental treatments to manipulate your independent variable
• Assign subjects to groups, either between-subjects or within-subjects
• Plan how you will measure your dependent variable

For valid conclusions, you also need to select a representative sample and control any  extraneous variables that might influence your results. If if random assignment of participants to control and treatment groups is impossible, unethical, or highly difficult, consider an observational study instead.

Table of contents

Step 1: define your variables, step 2: write your hypothesis, step 3: design your experimental treatments, step 4: assign your subjects to treatment groups, step 5: measure your dependent variable, frequently asked questions about experimental design.

You should begin with a specific research question . We will work with two research question examples, one from health sciences and one from ecology:

To translate your research question into an experimental hypothesis, you need to define the main variables and make predictions about how they are related.

Start by simply listing the independent and dependent variables .

Then you need to think about possible extraneous and confounding variables and consider how you might control  them in your experiment.

Finally, you can put these variables together into a diagram. Use arrows to show the possible relationships between variables and include signs to show the expected direction of the relationships.

Here we predict that increasing temperature will increase soil respiration and decrease soil moisture, while decreasing soil moisture will lead to decreased soil respiration.

Prevent plagiarism, run a free check.

Now that you have a strong conceptual understanding of the system you are studying, you should be able to write a specific, testable hypothesis that addresses your research question.

The next steps will describe how to design a controlled experiment . In a controlled experiment, you must be able to:

• Systematically and precisely manipulate the independent variable(s).
• Precisely measure the dependent variable(s).
• Control any potential confounding variables.

If your study system doesn’t match these criteria, there are other types of research you can use to answer your research question.

How you manipulate the independent variable can affect the experiment’s external validity – that is, the extent to which the results can be generalised and applied to the broader world.

First, you may need to decide how widely to vary your independent variable.

• just slightly above the natural range for your study region.
• over a wider range of temperatures to mimic future warming.
• over an extreme range that is beyond any possible natural variation.

Second, you may need to choose how finely to vary your independent variable. Sometimes this choice is made for you by your experimental system, but often you will need to decide, and this will affect how much you can infer from your results.

• a categorical variable : either as binary (yes/no) or as levels of a factor (no phone use, low phone use, high phone use).
• a continuous variable (minutes of phone use measured every night).

How you apply your experimental treatments to your test subjects is crucial for obtaining valid and reliable results.

First, you need to consider the study size : how many individuals will be included in the experiment? In general, the more subjects you include, the greater your experiment’s statistical power , which determines how much confidence you can have in your results.

Then you need to randomly assign your subjects to treatment groups . Each group receives a different level of the treatment (e.g. no phone use, low phone use, high phone use).

You should also include a control group , which receives no treatment. The control group tells us what would have happened to your test subjects without any experimental intervention.

When assigning your subjects to groups, there are two main choices you need to make:

• A completely randomised design vs a randomised block design .
• A between-subjects design vs a within-subjects design .

Randomisation

An experiment can be completely randomised or randomised within blocks (aka strata):

• In a completely randomised design , every subject is assigned to a treatment group at random.
• In a randomised block design (aka stratified random design), subjects are first grouped according to a characteristic they share, and then randomly assigned to treatments within those groups.

Sometimes randomisation isn’t practical or ethical , so researchers create partially-random or even non-random designs. An experimental design where treatments aren’t randomly assigned is called a quasi-experimental design .

Between-subjects vs within-subjects

In a between-subjects design (also known as an independent measures design or classic ANOVA design), individuals receive only one of the possible levels of an experimental treatment.

In medical or social research, you might also use matched pairs within your between-subjects design to make sure that each treatment group contains the same variety of test subjects in the same proportions.

In a within-subjects design (also known as a repeated measures design), every individual receives each of the experimental treatments consecutively, and their responses to each treatment are measured.

Within-subjects or repeated measures can also refer to an experimental design where an effect emerges over time, and individual responses are measured over time in order to measure this effect as it emerges.

Counterbalancing (randomising or reversing the order of treatments among subjects) is often used in within-subjects designs to ensure that the order of treatment application doesn’t influence the results of the experiment.

Finally, you need to decide how you’ll collect data on your dependent variable outcomes. You should aim for reliable and valid measurements that minimise bias or error.

Some variables, like temperature, can be objectively measured with scientific instruments. Others may need to be operationalised to turn them into measurable observations.

• Ask participants to record what time they go to sleep and get up each day.
• Ask participants to wear a sleep tracker.

How precisely you measure your dependent variable also affects the kinds of statistical analysis you can use on your data.

Experiments are always context-dependent, and a good experimental design will take into account all of the unique considerations of your study system to produce information that is both valid and relevant to your research question.

Experimental designs are a set of procedures that you plan in order to examine the relationship between variables that interest you.

To design a successful experiment, first identify:

• A testable hypothesis
• One or more independent variables that you will manipulate
• One or more dependent variables that you will measure

When designing the experiment, first decide:

• How your variable(s) will be manipulated
• How you will control for any potential confounding or lurking variables
• How many subjects you will include
• How you will assign treatments to your subjects

The key difference between observational studies and experiments is that, done correctly, an observational study will never influence the responses or behaviours of participants. Experimental designs will have a treatment condition applied to at least a portion of participants.

A confounding variable , also called a confounder or confounding factor, is a third variable in a study examining a potential cause-and-effect relationship.

A confounding variable is related to both the supposed cause and the supposed effect of the study. It can be difficult to separate the true effect of the independent variable from the effect of the confounding variable.

In your research design , it’s important to identify potential confounding variables and plan how you will reduce their impact.

In a between-subjects design , every participant experiences only one condition, and researchers assess group differences between participants in various conditions.

In a within-subjects design , each participant experiences all conditions, and researchers test the same participants repeatedly for differences between conditions.

The word ‘between’ means that you’re comparing different conditions between groups, while the word ‘within’ means you’re comparing different conditions within the same group.

Cite this Scribbr article

If you want to cite this source, you can copy and paste the citation or click the ‘Cite this Scribbr article’ button to automatically add the citation to our free Reference Generator.

Bevans, R. (2022, December 05). A Quick Guide to Experimental Design | 5 Steps & Examples. Scribbr. Retrieved 11 November 2024, from https://www.scribbr.co.uk/research-methods/guide-to-experimental-design/

Is this article helpful?

Rebecca Bevans

Experimental Research Design — 6 mistakes you should never make!

Since school days’ students perform scientific experiments that provide results that define and prove the laws and theorems in science. These experiments are laid on a strong foundation of experimental research designs.

An experimental research design helps researchers execute their research objectives with more clarity and transparency.

In this article, we will not only discuss the key aspects of experimental research designs but also the issues to avoid and problems to resolve while designing your research study.

Table of Contents

What Is Experimental Research Design?

Experimental research design is a framework of protocols and procedures created to conduct experimental research with a scientific approach using two sets of variables. Herein, the first set of variables acts as a constant, used to measure the differences of the second set. The best example of experimental research methods is quantitative research .

Experimental research helps a researcher gather the necessary data for making better research decisions and determining the facts of a research study.

When Can a Researcher Conduct Experimental Research?

A researcher can conduct experimental research in the following situations —

• When time is an important factor in establishing a relationship between the cause and effect.
• When there is an invariable or never-changing behavior between the cause and effect.
• Finally, when the researcher wishes to understand the importance of the cause and effect.

Importance of Experimental Research Design

To publish significant results, choosing a quality research design forms the foundation to build the research study. Moreover, effective research design helps establish quality decision-making procedures, structures the research to lead to easier data analysis, and addresses the main research question. Therefore, it is essential to cater undivided attention and time to create an experimental research design before beginning the practical experiment.

By creating a research design, a researcher is also giving oneself time to organize the research, set up relevant boundaries for the study, and increase the reliability of the results. Through all these efforts, one could also avoid inconclusive results. If any part of the research design is flawed, it will reflect on the quality of the results derived.

Types of Experimental Research Designs

Based on the methods used to collect data in experimental studies, the experimental research designs are of three primary types:

1. Pre-experimental Research Design

A research study could conduct pre-experimental research design when a group or many groups are under observation after implementing factors of cause and effect of the research. The pre-experimental design will help researchers understand whether further investigation is necessary for the groups under observation.

Pre-experimental research is of three types —

• One-shot Case Study Research Design
• One-group Pretest-posttest Research Design
• Static-group Comparison

2. True Experimental Research Design

A true experimental research design relies on statistical analysis to prove or disprove a researcher’s hypothesis. It is one of the most accurate forms of research because it provides specific scientific evidence. Furthermore, out of all the types of experimental designs, only a true experimental design can establish a cause-effect relationship within a group. However, in a true experiment, a researcher must satisfy these three factors —

• There is a control group that is not subjected to changes and an experimental group that will experience the changed variables
• A variable that can be manipulated by the researcher
• Random distribution of the variables

This type of experimental research is commonly observed in the physical sciences.

3. Quasi-experimental Research Design

The word “Quasi” means similarity. A quasi-experimental design is similar to a true experimental design. However, the difference between the two is the assignment of the control group. In this research design, an independent variable is manipulated, but the participants of a group are not randomly assigned. This type of research design is used in field settings where random assignment is either irrelevant or not required.

The classification of the research subjects, conditions, or groups determines the type of research design to be used.

Advantages of Experimental Research

Experimental research allows you to test your idea in a controlled environment before taking the research to clinical trials. Moreover, it provides the best method to test your theory because of the following advantages:

• Researchers have firm control over variables to obtain results.
• The subject does not impact the effectiveness of experimental research. Anyone can implement it for research purposes.
• The results are specific.
• Post results analysis, research findings from the same dataset can be repurposed for similar research ideas.
• Researchers can identify the cause and effect of the hypothesis and further analyze this relationship to determine in-depth ideas.
• Experimental research makes an ideal starting point. The collected data could be used as a foundation to build new research ideas for further studies.

6 Mistakes to Avoid While Designing Your Research

There is no order to this list, and any one of these issues can seriously compromise the quality of your research. You could refer to the list as a checklist of what to avoid while designing your research.

1. Invalid Theoretical Framework

Usually, researchers miss out on checking if their hypothesis is logical to be tested. If your research design does not have basic assumptions or postulates, then it is fundamentally flawed and you need to rework on your research framework.

2. Inadequate Literature Study

Without a comprehensive research literature review , it is difficult to identify and fill the knowledge and information gaps. Furthermore, you need to clearly state how your research will contribute to the research field, either by adding value to the pertinent literature or challenging previous findings and assumptions.

3. Insufficient or Incorrect Statistical Analysis

Statistical results are one of the most trusted scientific evidence. The ultimate goal of a research experiment is to gain valid and sustainable evidence. Therefore, incorrect statistical analysis could affect the quality of any quantitative research.

4. Undefined Research Problem

This is one of the most basic aspects of research design. The research problem statement must be clear and to do that, you must set the framework for the development of research questions that address the core problems.

5. Research Limitations

Every study has some type of limitations . You should anticipate and incorporate those limitations into your conclusion, as well as the basic research design. Include a statement in your manuscript about any perceived limitations, and how you considered them while designing your experiment and drawing the conclusion.

6. Ethical Implications

The most important yet less talked about topic is the ethical issue. Your research design must include ways to minimize any risk for your participants and also address the research problem or question at hand. If you cannot manage the ethical norms along with your research study, your research objectives and validity could be questioned.

Experimental Research Design Example

In an experimental design, a researcher gathers plant samples and then randomly assigns half the samples to photosynthesize in sunlight and the other half to be kept in a dark box without sunlight, while controlling all the other variables (nutrients, water, soil, etc.)

By comparing their outcomes in biochemical tests, the researcher can confirm that the changes in the plants were due to the sunlight and not the other variables.

Experimental research is often the final form of a study conducted in the research process which is considered to provide conclusive and specific results. But it is not meant for every research. It involves a lot of resources, time, and money and is not easy to conduct, unless a foundation of research is built. Yet it is widely used in research institutes and commercial industries, for its most conclusive results in the scientific approach.

Have you worked on research designs? How was your experience creating an experimental design? What difficulties did you face? Do write to us or comment below and share your insights on experimental research designs!

Frequently Asked Questions

Randomization is important in an experimental research because it ensures unbiased results of the experiment. It also measures the cause-effect relationship on a particular group of interest.

Experimental research design lay the foundation of a research and structures the research to establish quality decision making process.

There are 3 types of experimental research designs. These are pre-experimental research design, true experimental research design, and quasi experimental research design.

The difference between an experimental and a quasi-experimental design are: 1. The assignment of the control group in quasi experimental research is non-random, unlike true experimental design, which is randomly assigned. 2. Experimental research group always has a control group; on the other hand, it may not be always present in quasi experimental research.

Experimental research establishes a cause-effect relationship by testing a theory or hypothesis using experimental groups or control variables. In contrast, descriptive research describes a study or a topic by defining the variables under it and answering the questions related to the same.

good and valuable

Very very good

Good presentation.

Rate this article Cancel Reply

Your email address will not be published.

Enago Academy's Most Popular Articles

• Promoting Research

Graphical Abstracts Vs. Infographics: Best practices for using visual illustrations for increased research impact

Dr. Sarah Chen stared at her computer screen, her eyes staring at her recently published…

• Publishing Research

10 Tips to Prevent Research Papers From Being Retracted

Research paper retractions represent a critical event in the scientific community. When a published article…

• Industry News

Google Releases 2024 Scholar Metrics, Evaluates Impact of Scholarly Articles

Google has released its 2024 Scholar Metrics, assessing scholarly articles from 2019 to 2023. This…

Ensuring Academic Integrity and Transparency in Academic Research: A comprehensive checklist for researchers

Academic integrity is the foundation upon which the credibility and value of scientific findings are…

• Reporting Research

How to Optimize Your Research Process: A step-by-step guide

For researchers across disciplines, the path to uncovering novel findings and insights is often filled…

Choosing the Right Analytical Approach: Thematic analysis vs. content analysis for…

Comparing Cross Sectional and Longitudinal Studies: 5 steps for choosing the right…

Sign-up to read more

Subscribe for free to get unrestricted access to all our resources on research writing and academic publishing including:

• 2000+ blog articles
• 50+ Webinars
• 10+ Expert podcasts
• 50+ Infographics
• 10+ Checklists
• Research Guides

We hate spam too. We promise to protect your privacy and never spam you.

• AI in Academia
• Career Corner
• Diversity and Inclusion
• Infographics
• Expert Video Library
• Other Resources
• Enago Learn
• Upcoming & On-Demand Webinars
• Open Access Week 2024
• Peer Review Week 2024
• Conference Videos
• Enago Report
• Journal Finder
• Enago Plagiarism & AI Grammar Check
• Editing Services
• Publication Support Services
• Research Impact
• Translation Services
• Publication solutions
• AI-Based Solutions
• Thought Leadership
• Call for Articles
• Call for Speakers
• Author Training
• Edit Profile

I am looking for Editing/ Proofreading services for my manuscript Tentative date of next journal submission:

Which among these would you prefer the most for improving research integrity?

Experimental design: Guide, steps, examples

Last updated

27 April 2023

Reviewed by

Miroslav Damyanov

Short on time? Get an AI generated summary of this article instead

Experimental research design is a scientific framework that allows you to manipulate one or more variables while controlling the test environment. 

When testing a theory or new product, it can be helpful to have a certain level of control and manipulate variables to discover different outcomes. You can use these experiments to determine cause and effect or study variable associations. 

This guide explores the types of experimental design, the steps in designing an experiment, and the advantages and limitations of experimental design. 

Make research less tedious

Dovetail streamlines research to help you uncover and share actionable insights

• What is experimental research design?

You can determine the relationship between each of the variables by: 

Manipulating one or more independent variables (i.e., stimuli or treatments)

Applying the changes to one or more dependent variables (i.e., test groups or outcomes)

With the ability to analyze the relationship between variables and using measurable data, you can increase the accuracy of the result. 

What is a good experimental design?

A good experimental design requires: 

Significant planning to ensure control over the testing environment

Sound experimental treatments

Properly assigning subjects to treatment groups

Without proper planning, unexpected external variables can alter an experiment's outcome. 

To meet your research goals, your experimental design should include these characteristics:

Provide unbiased estimates of inputs and associated uncertainties

Enable the researcher to detect differences caused by independent variables

Include a plan for analysis and reporting of the results

Provide easily interpretable results with specific conclusions

What's the difference between experimental and quasi-experimental design?

The major difference between experimental and quasi-experimental design is the random assignment of subjects to groups. 

A true experiment relies on certain controls. Typically, the researcher designs the treatment and randomly assigns subjects to control and treatment groups. 

However, these conditions are unethical or impossible to achieve in some situations.

When it's unethical or impractical to assign participants randomly, that’s when a quasi-experimental design comes in. 

This design allows researchers to conduct a similar experiment by assigning subjects to groups based on non-random criteria. 

Another type of quasi-experimental design might occur when the researcher doesn't have control over the treatment but studies pre-existing groups after they receive different treatments.

When can a researcher conduct experimental research?

Various settings and professions can use experimental research to gather information and observe behavior in controlled settings. 

Basically, a researcher can conduct experimental research any time they want to test a theory with variable and dependent controls. 

Experimental research is an option when the project includes an independent variable and a desire to understand the relationship between cause and effect. 

• The importance of experimental research design

Experimental research enables researchers to conduct studies that provide specific, definitive answers to questions and hypotheses. 

Researchers can test Independent variables in controlled settings to:

Test the effectiveness of a new medication

Design better products for consumers

Answer questions about human health and behavior

Developing a quality research plan means a researcher can accurately answer vital research questions with minimal error. As a result, definitive conclusions can influence the future of the independent variable. 

Types of experimental research designs

There are three main types of experimental research design. The research type you use will depend on the criteria of your experiment, your research budget, and environmental limitations. 

Pre-experimental research design

A pre-experimental research study is a basic observational study that monitors independent variables’ effects. 

During research, you observe one or more groups after applying a treatment to test whether the treatment causes any change. 

The three subtypes of pre-experimental research design are:

One-shot case study research design

This research method introduces a single test group to a single stimulus to study the results at the end of the application. 

After researchers presume the stimulus or treatment has caused changes, they gather results to determine how it affects the test subjects. 

One-group pretest-posttest design

This method uses a single test group but includes a pretest study as a benchmark. The researcher applies a test before and after the group’s exposure to a specific stimulus. 

Static group comparison design

This method includes two or more groups, enabling the researcher to use one group as a control. They apply a stimulus to one group and leave the other group static. 

A posttest study compares the results among groups. 

True experimental research design

A true experiment is the most common research method. It involves statistical analysis to prove or disprove a specific hypothesis . 

Under completely experimental conditions, researchers expose participants in two or more randomized groups to different stimuli. 

Random selection removes any potential for bias, providing more reliable results. 

These are the three main sub-groups of true experimental research design:

Posttest-only control group design

This structure requires the researcher to divide participants into two random groups. One group receives no stimuli and acts as a control while the other group experiences stimuli.

Researchers perform a test at the end of the experiment to observe the stimuli exposure results.

Pretest-posttest control group design

This test also requires two groups. It includes a pretest as a benchmark before introducing the stimulus. 

The pretest introduces multiple ways to test subjects. For instance, if the control group also experiences a change, it reveals that taking the test twice changes the results.

Solomon four-group design

This structure divides subjects into two groups, with two as control groups. Researchers assign the first control group a posttest only and the second control group a pretest and a posttest. 

The two variable groups mirror the control groups, but researchers expose them to stimuli. The ability to differentiate between groups in multiple ways provides researchers with more testing approaches for data-based conclusions. 

Quasi-experimental research design

Although closely related to a true experiment, quasi-experimental research design differs in approach and scope. 

Quasi-experimental research design doesn’t have randomly selected participants. Researchers typically divide the groups in this research by pre-existing differences. 

Quasi-experimental research is more common in educational studies, nursing, or other research projects where it's not ethical or practical to use randomized subject groups.

• 5 steps for designing an experiment

Experimental research requires a clearly defined plan to outline the research parameters and expected goals. 

Here are five key steps in designing a successful experiment:

Step 1: Define variables and their relationship

Your experiment should begin with a question: What are you hoping to learn through your experiment? 

The relationship between variables in your study will determine your answer.

Define the independent variable (the intended stimuli) and the dependent variable (the expected effect of the stimuli). After identifying these groups, consider how you might control them in your experiment. 

Could natural variations affect your research? If so, your experiment should include a pretest and posttest. 

Step 2: Develop a specific, testable hypothesis

With a firm understanding of the system you intend to study, you can write a specific, testable hypothesis. 

What is the expected outcome of your study? 

Develop a prediction about how the independent variable will affect the dependent variable. 

How will the stimuli in your experiment affect your test subjects? 

Your hypothesis should provide a prediction of the answer to your research question . 

Step 3: Design experimental treatments to manipulate your independent variable

Depending on your experiment, your variable may be a fixed stimulus (like a medical treatment) or a variable stimulus (like a period during which an activity occurs). 

Determine which type of stimulus meets your experiment’s needs and how widely or finely to vary your stimuli. 

Step 4: Assign subjects to groups

When you have a clear idea of how to carry out your experiment, you can determine how to assemble test groups for an accurate study. 

When choosing your study groups, consider: 

The size of your experiment

Whether you can select groups randomly

Your target audience for the outcome of the study

You should be able to create groups with an equal number of subjects and include subjects that match your target audience. Remember, you should assign one group as a control and use one or more groups to study the effects of variables. 

Step 5: Plan how to measure your dependent variable

This step determines how you'll collect data to determine the study's outcome. You should seek reliable and valid measurements that minimize research bias or error. 

You can measure some data with scientific tools, while you’ll need to operationalize other forms to turn them into measurable observations.

• Advantages of experimental research

Experimental research is an integral part of our world. It allows researchers to conduct experiments that answer specific questions. 

While researchers use many methods to conduct different experiments, experimental research offers these distinct benefits:

Researchers can determine cause and effect by manipulating variables.

It gives researchers a high level of control.

Researchers can test multiple variables within a single experiment.

All industries and fields of knowledge can use it. 

Researchers can duplicate results to promote the validity of the study .

Replicating natural settings rapidly means immediate research.

Researchers can combine it with other research methods.

It provides specific conclusions about the validity of a product, theory, or idea.

• Disadvantages (or limitations) of experimental research

Unfortunately, no research type yields ideal conditions or perfect results. 

While experimental research might be the right choice for some studies, certain conditions could render experiments useless or even dangerous. 

Before conducting experimental research, consider these disadvantages and limitations:

Required professional qualification

Only competent professionals with an academic degree and specific training are qualified to conduct rigorous experimental research. This ensures results are unbiased and valid. 

Limited scope

Experimental research may not capture the complexity of some phenomena, such as social interactions or cultural norms. These are difficult to control in a laboratory setting.

Resource-intensive

Experimental research can be expensive, time-consuming, and require significant resources, such as specialized equipment or trained personnel.

Limited generalizability

The controlled nature means the research findings may not fully apply to real-world situations or people outside the experimental setting.

Practical or ethical concerns

Some experiments may involve manipulating variables that could harm participants or violate ethical guidelines . 

Researchers must ensure their experiments do not cause harm or discomfort to participants. 

Sometimes, recruiting a sample of people to randomly assign may be difficult. 

• Experimental research design example

Experiments across all industries and research realms provide scientists, developers, and other researchers with definitive answers. These experiments can solve problems, create inventions, and heal illnesses. 

Product design testing is an excellent example of experimental research. 

A company in the product development phase creates multiple prototypes for testing. With a randomized selection, researchers introduce each test group to a different prototype. 

When groups experience different product designs , the company can assess which option most appeals to potential customers. 

Experimental research design provides researchers with a controlled environment to conduct experiments that evaluate cause and effect. 

Using the five steps to develop a research plan ensures you anticipate and eliminate external variables while answering life’s crucial questions.

Should you be using a customer insights hub?

Do you want to discover previous research faster?

Do you share your research findings with others?

Do you analyze research data?

Start for free today, add your research, and get to key insights faster

Editor’s picks

Last updated: 9 November 2024

Last updated: 24 October 2024

Last updated: 11 January 2024

Last updated: 30 April 2024

Last updated: 12 December 2023

Last updated: 4 July 2024

Last updated: 12 October 2023

Last updated: 6 March 2024

Last updated: 5 March 2024

Last updated: 31 January 2024

Last updated: 23 January 2024

Last updated: 13 May 2024

Last updated: 20 December 2023

Latest articles

Related topics, a whole new way to understand your customer is here.

• Types of experimental

Log in or sign up

Get started for free

Experimental Design

Ethics, Integrity, and the Scientific Method

• Reference work entry
• First Online: 02 April 2020
• Cite this reference work entry

• Jonathan Lewis 2  

3011 Accesses

5 Citations

Experimental design is one aspect of a scientific method. A well-designed, properly conducted experiment aims to control variables in order to isolate and manipulate causal effects and thereby maximize internal validity, support causal inferences, and guarantee reliable results. Traditionally employed in the natural sciences, experimental design has become an important part of research in the social and behavioral sciences. Experimental methods are also endorsed as the most reliable guides to policy effectiveness. Through a discussion of some of the central concepts associated with experimental design, including controlled variation and randomization, this chapter will provide a summary of key ethical issues that tend to arise in experimental contexts. In addition, by exploring assumptions about the nature of causation and by analyzing features of causal relationships, systems, and inferences in social contexts, this chapter will summarize the ways in which experimental design can undermine the integrity of not only social and behavioral research but policies implemented on the basis of such research.

This is a preview of subscription content, log in via an institution to check access.

Access this chapter

Subscribe and save.

• Get 10 units per month
• Download Article/Chapter or eBook
• 1 Unit = 1 Article or 1 Chapter
• Cancel anytime
• Available as PDF
• Read on any device
• Instant download
• Own it forever
• Available as EPUB and PDF
• Durable hardcover edition
• Dispatched in 3 to 5 business days
• Free shipping worldwide - see info

Tax calculation will be finalised at checkout

Purchases are for personal use only

Institutional subscriptions

Similar content being viewed by others

Research Design: Toward a Realistic Role for Causal Analysis

Experiments and Econometrics

Alderson P (1996) Equipoise as a means of managing uncertainty: personal, communal and proxy. J Med Ethics 223:135–139

Article   Google Scholar  

Arabatzis T (2014) Experiment. In: Curd M, Psillos S (eds) The Routledge companion to philosophy of science, 2nd edn. Routledge, London, pp 191–202

Google Scholar  

Baele S (2013) The ethics of new development economics: is the experimental approach to development economics morally wrong? J Philos Econ 7(1):2–42

Beauchamp T, Childress J (2013) Principles of biomedical ethics, 7th edn. Oxford University Press, Oxford

Binmore K (1999) Why experiment in economics? Econ J 109(453):16–24

Bogen J (2002) Epistemological custard pies from functional brain imaging. Philos Sci 69(3):59–71

Bordens K, Abbott B (2013) Research and design methods: a process approach. McGraw-Hill, Boston

Brady H (2011) Causation and explanation in social science. In: Goodin R (ed) The Oxford handbook of political science. Oxford University Press, Oxford, pp 1054–1107

Broome J (1984) Selecting people randomly. Ethics 95(1):38–55

Brown A, Mehta T, Allison D (2017) Publication bias in science: what is it, why is it problematic, and how can it be addressed? In: Jamieson K, Kahan D, Scheufele D (eds) The Oxford handbook of the science of science communication. Oxford University Press, Oxford, pp 93–101

Cartwright N (1999) The dappled world: a study of the boundaries of science. Cambridge University Press, Cambridge, UK

Book   Google Scholar  

Cartwright N (2007) Hunting causes and using them. Cambridge University Press, Cambridge, UK

Cartwright N (2012) RCTs, evidence, and predicting policy effectiveness. In: Kincaid H (ed) The Oxford handbook of philosophy of social science. Oxford University Press, Oxford, UK, pp 298–318

Cartwright N (2014) Causal inference. In: Cartwright N, Montuschi E (eds) Philosophy of social science: a new introduction. Oxford University Press, Oxford, pp 308–337

Churchill L (1980) Physician-investigator/patient-subject: exploring the logic and the tension. J Med Philos 5(3):215–224

Clarke S (1999) Justifying deception in social science research. J Appl Philos 16(2):151–166

Conner R (1982) Random assignment of clients in social experimentation. In: Sieber J (ed) The ethics of social research: surveys and experiments. Springer, New York, pp 57–77

Chapter   Google Scholar  

Cook T, Campbell D (1986) The causal assumptions of quasi-experimental practice. Synthese 68(1):141–180

Cook C, Sheets C (2011) Clinical equipoise and personal equipoise: two necessary ingredients for reducing bias in manual therapy trials. J Man Manipulative Ther 19(1):55–57

Crasnow S (2017) Bias in social science experiments. In: McIntyre L, Rosenberg A (eds) The Routledge companion to the philosophy of social science. Routledge, London, pp 191–201

Douglas H (2014) Values in social science. In: Cartwright N, Montuschi E (eds) Philosophy of social science: a new introduction. Oxford University Press, Oxford, pp 162–182

Feest U, Steinle F (2016) Experiment. In: Humphreys P (ed) The Oxford handbook of philosophy of science. Oxford University Press, Oxford, pp 274–295

Freedman B (1987) Equipoise and the ethics of clinical research. N Engl J Med 317(3):141–145

Freedman B, Glass K, Weijer C (1996) Placebo orthodoxy in clinical research II: ethical, legal, and regulatory myths. J Law Med Ethics 24(3):252–259

Fried C (1974) Medical experimentation: personal integrity and social policy. Elsevier, New York

Gangl M (2010) Causal inference in sociological research. Annu Rev Sociol 36:21–47

Geller D (1982) Alternatives to deception: why, what, and how? In: Sieber JE (ed) The ethics of social research: surveys and experiments. Springer, New York, pp 38–55

Gifford F (1986) The conflict between randomized clinical trials and the therapeutic obligation. J Med Philos 11:347–366

Gillon R (1994) Medical ethics: four principles plus attention to scope. Br Med J 309(6948):184–188

Goldthorpe J (2001) Causation, statistics, and sociology. Eur Sociol Rev 17(1):1–20

Guala F (2005) The methodology of experimental economics. Cambridge University Press, Cambridge

Guala F (2009) Methodological issues in experimental design and interpretation. In: Kincaid H, Ross D (eds) The Oxford handbook of philosophy of economics. Oxford University Press, Oxford, pp 280–305

Guala F (2012) Experimentation in economics. In: Mäki U (ed) Philosophy of economics. Elsevier/North Holland, Oxford, pp 597–640

Hacking I (1999) The social construction of what? Harvard University Press, Cambridge, MA

Hammersley M (2008) Paradigm war revived? On the diagnosis of resistance to randomized controlled trials and systematic review in education. Int J Res Method Educ 31(1):3–10

Hegtvedt K (2014) Ethics and experiments. In: Webster M, Sell J (eds) Laboratory experiments in the social sciences. Academic, London, pp 23–51

Holmes D (1976) ‘Debriefing after psychological experiments: I. Effectiveness of postdeception dehoaxing’ and ‘Debriefing after psychological experiments: II. Effectiveness of postexperimental desensitizing’. Am Psychol 32:858–875

Humphreys M (2015) Reflections on the ethics of social experimentation. J Glob Dev 6(1):87–112

Kaidesoja T (2017) Causal inference and modeling. In: McIntyre L, Rosenberg A (eds) The Routledge companion to philosophy of social science. Routledge, London, pp 202–213

Kelman H (1982) Ethical issues in different social science methods. In: Beauchamp T et al (eds) Ethical issues in social science research. John Hopkins University Press, Baltimore, pp 40–98

Kuorikoski J, Marchionni C (2014) Philosophy of economics. In: French S, Saatsi J (eds) The Bloomsbury companion to the philosophy of science. Bloomsbury, London, pp 314–333

Levine R (1979) Clarifying the concepts of research ethics. Hast Cent Rep 9(3):21–26

Lilford R, Jackson J (1995) Equipoise and the ethics of randomization. J R Soc Med 88(10):552–559

Miller F, Brody H (2003) A critique of clinical equipoise: therapeutic misconception in the ethics of clinical trials. Hast Cent Rep 33(3):19–28

Miller P, Weijer C (2006) Fiduciary obligation in clinical research. J Law Med Ethics 34(2):424–440

Mitchell S (2009) Unsimple truths: science, complexity, and policy. University of Chicago Press, Chicago

Morton R, Williams K (2010) Experimental political science and the study of causality: from nature to the lab. Cambridge University Press, Cambridge, UK

Oakley A et al (2003) Using random allocation to evaluate social interventions: three recent UK examples. Ann Am Acad Pol Soc Sci 589(1):170–189

Papineau D (1994) The virtues of randomization. Br J Philos Sci 45:437–450

Pearl J (2000) Causality-models, reasoning and inference. Cambridge University Press, Cambridge, UK

Risjord M (2014) Philosophy of social science: a contemporary introduction. Routledge, London

Sieber, Joan (1982) Ethical dilemmas in social research. In: Sieber J (ed) The ethics of social research: surveys and experiments. Springer, New York, pp 1–29

Sieber J (1992) Planning ethically responsible research: a guide for students and internal review boards. Sage, Newbury Park

Sobel M (1996) An introduction to causal inference. Sociol Methods Res 24(3):353–379

Sullivan J (2009) The multiplicity of experimental protocols. A challenge to reductionist and non-reductionist models of the unity of neuroscience. Synthese 167:511–539

Urbach P (1985) Randomization and the design of experiments. Philos Sci 52:256–273

Veatch R (2007) The irrelevance of equipoise. J Med Philos 32(2):167–183

Wilholt T (2009) Bias and values in scientific research. Stud Hist Phil Sci 40(1):92–101

Woodward J (2008) Invariance, modularity, and all that. Cartwright on causation. In: Cartwright N et al (eds) Nancy Cartwright’s philosophy of science. Routledge, New York, pp 198–237

Worrall J (2002) What evidence in evidence-based medicine? Philos Sci 69(3):316–330

Worrall J (2007) Why there’s no cause to randomize. Br J Philos Sci 58(3):451–488

Download references

Author information

Authors and affiliations.

Institute of Ethics, School of Theology, Philosophy and Music, Faculty of Humanities and Social Sciences, Dublin City University, Dublin, Ireland

Jonathan Lewis

You can also search for this author in PubMed   Google Scholar

Corresponding author

Correspondence to Jonathan Lewis .

Editor information

Editors and affiliations.

Chatelaillon Plage, France

Ron Iphofen

Rights and permissions

Reprints and permissions

Copyright information

© 2020 Springer Nature Switzerland AG

About this entry

Cite this entry.

Lewis, J. (2020). Experimental Design. In: Iphofen, R. (eds) Handbook of Research Ethics and Scientific Integrity. Springer, Cham. https://doi.org/10.1007/978-3-030-16759-2_19

Download citation

DOI : https://doi.org/10.1007/978-3-030-16759-2_19

Published : 02 April 2020

Publisher Name : Springer, Cham

Print ISBN : 978-3-030-16758-5

Online ISBN : 978-3-030-16759-2

eBook Packages : Religion and Philosophy Reference Module Humanities and Social Sciences Reference Module Humanities

Share this entry

Anyone you share the following link with will be able to read this content:

Sorry, a shareable link is not currently available for this article.

Provided by the Springer Nature SharedIt content-sharing initiative

• Publish with us

Policies and ethics

• Find a journal
• Track your research